Coleman 9992-449 system manual Liquid Propane Conversion Kit

Page 1

Liquid Propane Conversion Kit

For the following Coleman® Gas Barbecue Grills:

8350 Series (M/N 9992-648)

Note: These instructions apply to grill Model 8350 Series. The parts included are designed for your specific grill. The illustrations may differ slightly from model to model.

IMPORTANT

Read this document carefully before attempting installation of this conversion kit. These instructions should be left with the consumer for future reference.

WARNING

This Liquid Propane conversion Kit must be installed only by a quali- fied service technician.

Gas supply system must be installed in accordance with the U.S. National Fuel Gas Code.

This appliance and its individual shut off valve must be disconnected from the gas supply piping system during any system pressure test in excess of 1/2 PSI (3.5 KPA).

Use a system manual shut off valve to shut off the gas supply to this gas appliance before continuing with installation procedures.

WARNING

If the information in this document is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. Read the Coleman® Gas Barbecue Use, Care & Assembly Manual With Grill Lighting Instructions, before attempting installation of this conversion kit.

WARNING

• TURN OFF THE GAS SUPPLY!

DO NOT attempt to install this Natural Gas Conversion Kit

while the barbecue is in operation or is hot.

WARNING

A liquid propane tank, not connected for use with this gas barbecue,

shall not be stored in the vicinity of this or any other appliance.

Installation and provision for combustion and ventilation air must conform with the National Fuel Gas Code, ANSI Z223.1, or CAN/CGA-B149.1, Natural Gas Installation Code, or CAN/CGA-B149.2, Propane Installation Code.

Turn off and disconnect from Natural Gas service line prior to servicing grill.

Image 1
Contents Liquid Propane Conversion Kit Liquid Propane Gas Conversion Instructions Tools Needed Screws Under lip Flex Line Gas Inlet Flex Line Manifold Screws You are now ready to install New LP manifold Pipe dope should not be used on any flared fittings Installing the L.P. regulatorConverting the Rear Infrared Burner to LP Label the Grill Installation is now complete Enjoy your grill safelyLiquid Propane Gas Conversion Instructions Liquid Propane Gas Conversion Instructions 9992-449 8/14/06