Natural Gas Conversion Instructions
4.Remove the two screws holding the bezel and valve in place. Remove bezel from the front of the side burner (Fig. 38).
5.Remove the two screws holding the side burner LP valve assembly in place. This will free up the assembly (Fig. 39 & 40).
6.Disconnect the igniter wire from the side burner electrode (Fig. 40).
7.Holding the assembly securely, remove side burner valve assembly from casting. Replace with new side NG side burner valve assembly (Fig. 41 & 42).
Fig 38
Screws
Fig 39
Igniter Wire
Fig 40
|
| Side Burner Valve Assy | |
Casting | |||
|
| ||
|
|
|
Fig 41
|
| Side Burner Valve Assy | |
Casting | |||
|
| ||
|
|
|
Fig 42
11