AttachFireboxto Cabinet
[] Place the firebox onto the cabinet frame with regulator hose and side burner ignition wire hanging inside of the cabinet, We recommend using 2 people to lift the firebox.
[] Line up the holes and attach the firebox to the cabinet frame using 4 Phillips Head Bolts (M6x16mm) and 4 Washers (M6x!.0T).
Hint: You may need to slide the Firebox Assembly forward, backward, or lift slightly for the bolt holes to properly line up.
Phillips Head Bolt M6x16mm
Qty: 4
Plastic Washer M6xl.0T
qty: 4
Install Grease Cup Bracket and Grease Cup
[] Attach the Grease Cup Bracket to the bottom of the Grease Tray using 2 Cotter Pins as shown. The Cotter Pins in the bracket are towards the front of the grill. See Insets 1 and 2.
[] Install the Grease Cup into the Grease Cup Bracket, inserting it from the front of the cabinet. See Inset 3,
O
Cotter Pin
Qty: 2
0
Inset 1 | Inset 2 | Inset 3 |
13