I,_.t :IF__I I D][or__l: din4_ [,,.i II : I.[q IIn(o] _[,:
Grill Lighting Instructions
I.Before each use, check all hoses for cracks, nicks, cuts, or abrasions. If a hose is damaged in any way, do not use your grill before replacing the hose with an authorized
part from the Parts List. Also make sure all gas supply connections are securely tightened.
2.Familiarize yourself with the Safety and Use and Care instructions in this manual. Do not
smoke while lighting the grill or checking gas supply connections.
3.Be sure the LP gas tank has gas.
4.Open the grill lid.
Failure to replace a faulty hose, secure gas supply connections, or to open the lid before proceeding to the Lighting Procedures could result in a fire or explosion that could cause serious bodily injury, death, or property damage.
5.Set control knobs to OFF and open the LP gas tank valve SLOWLY.
O
Low
6.Push and turn any control knob to Hi
O
Back Burner | Electric Igniter |
Main Burner
Side Burner and Back Burner Lighting Instructions
1.Follow steps 1 through 4 of the Grill Lighting Instructions.
2.Open the grill lid or side burner cover.
3.Set control knobs to OFF and open the LP gas tank valve SLOWLY
4.Push and turn the control knob to "Hi".
Immediately press the electric igniter button for
6, If the burner does not light within 5 seconds, turn the burner control knob to "OFF". Wait
5 minutes for the gas to clear, and repeat the above procedure.
Low
7.Immediately press the electronic igniter button for
8.Once one burner is lit, the adjacent burner can be lit by turning its control knob to Hi.
9.When lit, turn the control knob to its desired setting.
7, Continue to press in and hold the back burner control knob for 5 to 7 seconds once lit to activate the safety flame
sensor. Failure to do so will cause gas to be shut off to the back burner and the burner will go out.
Side Burner
22