Kenmore 119.16312800 manual Manually Lighting the Burners with Match Holder

Page 23

MANUALLY LIGHTING THE BURNERS WITH

THE MATCH HOLDER

1.Open the lid.

2.Ensure all burners are in the "OFF" position.

3.Slowly turn on the gas at the LP cylinder valve if it is not already on.

4.Place a match in the match light stick, This is located inside the left cabinet door.

5.Use the stick to slide the lit match through the cooking grates and the front of the heat diffuser to the burner you wish to light.

6.Press and turn the burner control knob to "Hi". Continue to push in and hold up to 5 seconds or until the burner lights.

If the burner does not light within 5 seconds, turn the burner control knob to

"OFF". Wait 5 minutes for gas to clear, and try again.

8.When lit, turn the control knob to the desired heat setting.

1.Do not use charcoal briquettes, lava rock, or any type of ceramic product in this grill.

2.Do not put a barbecue cover or other flammable material in the storage area of this grill.

MANUALLY LIGHTING THE SIDE BURNER

OR THE BACK BURNER

1.Open the grill lid or side burner coven

2.Ensure the control knob is in the "OFF"

position as well as any main burner not in

use,

3.Slowly turn on the gas if it is not already on.

4.Strike the match, and place near the top of the burner.

5.Turn the control knob to "Hi"

6, If the burner does not light within 5 seconds, turn the burner control knob to "OFF". Wait 5 minutes for the gas to clear, and try again.

7.When lit, turn the control knob to the desired setting.

8, Continue to press in and hold the back burner control knob for 5 to 7 seconds once lit to activate the safety flame sensor. Failure to do so will cause gas to be shut off to the back burner and the burner will go out.

Never lean over the grill cooking area while lighting your gas grill. Keep your face and body a safe distance (at least 18 inches) from the lighting hole and burners when lighting your grill with a match.

23

Image 23
Contents Date of Purchase Liquid Propane Gas LPG GrillRecord Your Serial Number Sears, Roebuck and Co Hoffman Estates, IL Kenmore 1-Year Full WarrantyLimited Warranty on Selected Grill Parts HY-HOIE to arrange forPRE-ASSEMBLY TheinstallationmustconformwithlocalcodesorQTY Purpose of Part PART# Part DescriptionQty Part # SE0123D-002 Page KEY Description PART# QTY KEY Description PART# KEY Description PART# QTY HRemove Firebox from Cabinet Install Control Knobs and CastersCabinet Front Crossbar Door Top Brackets Attach Doors to CabinetHang Condiment Basket and attach Cabinet Door Stop Install Grease TrayAttachFireboxto Cabinet Install Grease Cup Bracket and Grease CupSide Burner Frame Firebox Install Towel Bar Handles, Utensil Hooks, Side PanelsAttach Side Burner Control Panel to Main Control Panel Install Side Burner ValveAttach Side Burner Control Knob WireInstall Side Shelf Frame to Firebox Install Heat Congratulations Assembly is now complete Use your grill at least 2 feet away from any Correct LP GAS Tank USETo Connect the Cylinder to Regulator and Hose How to Leak Test your LP Gas Tank For your safetyRegulator and LP Cylinder Connections RegulatorCheck all connections for LP Gas Leaks Disconnecting a Liquid Propane Gas LPG Tank From Your GrillFlow Limiting Valves on LP Gas Tanks Transportation and StorageSide Burner and Back Burner Lighting Instructions Grill Lighting InstructionsManually Lighting the Burners with Match Holder Follow the steps below to reset the flow Troubleshooting If the grill fails to lightPropercareandmaintenancewillkeepyourgrillin Burner Flames To reduce the chance of Flashback Fire you mustBurn-Off Cooking TemperatureAn Important Note About Cooking Temperature Using the Back Burner If EquippedMy electronic ignition is not working Answer QuestionQuestion My grill will not light properly. Why? Answer Answer MY-HOME OurHome