Kenmore 119.1623 manual Ill

Page 12

Please

ill

refer to pages 5 through 8 for item graphics.

Install Casters

[] Place the Cabinet Assembly (A) upside down and attach the 4 Casters to the Caster Seats. Use care to install each Caster into the

correct position.

01

O3

./

02

Phillips Head Bolt: M6x5/8" (with blue paint)

Qty: 16

Part # SB0027

©

Washer: M6

Qty: 16

Part # SBO005

Install Cylinder Support Ring, Cabinet Front Crossbar and Cabinet Door

[] Put the Cylinder Support Ring (U) into two holes in left side cabinet frame. See Inset 1

[] Attach the Cabinet Front Crossbar (B) to the Cabinet Assembly using 4 Bolts N6x3/8" and 4 M6 Washers. See Inset 2.

[] Attach Cabinet Left Door (3) and Cabinet Right Door (K) to the Cabinet Assembly using 8 Bolts M4x3/8". See Inset 3.

Phillips		Head Bolt: M6x3/8"
Qty:	4	Inset 2
Part	#	SBO004
©
Washer:		M6
qty:	4
Part	#	SB0005
		Inset 1
		Inset 3
Flat	Head Bolt: M4x3/8"
Qty:	8
Part	#	SB0029

Image 12

Contents Record Your SERIAL# Date of Purchase Attach Your Sales Receipt HereOne-Year Full Warranty on Kenmore Grill Ten-Year Limited Warranty on Stainless Steel BurnersWarranty Restrictions Sears, Roebuck and Co Hoffman Estates, ILFailuretocomplywiththeseinstructionscould SB0029 QTY Purpose of PartItem No QtyDescription Qty Item No DescriptionItem No Description Qty Page KEY QTYQTY Ill Install Condiment Basket and Cabinet Door Stopper Assemble Side Burner Assembly Grease Pan SupportInstall Side Burner Control Panel to Side Burner Assembly Install Side Burner Assembly to Firebox AssemblySecure Side Burner Assembly to the Firebox Assembly Assemble Side Shelf Assembly \\\\IIIIAssembly Side Shelf Control PanelSecure Side Shelf Assembly to the Firebox Assembly Place LP Cylinder into the Cabinet Hose Support Ring to Cabinet Side PanelCabinet Battery Congratulations Assembly in now CompleteCorrect LP GAS Tank USE Use your grill at least 2 feet away fromHow to Leak Test your LP Gas Tank For your safety RegulatorTo Connect the Cylinder to Regulator and Hose Hand Tighten Only, Do Not Use a WrenchDisconnecting a Liquid Propane Gas LPG Tank From Your Grill Flow Limiting Valves on LP Gas TanksTransportation and Storage Check all connections for LP Gas LeaksOT1 Hanuallylighting the Burners with Hatch Holder Hanually Lighting the Side Burner Or the Back BurnerTroubleshooting If the grill fails to light Follow the steps below to reset the flow limiting deviceCleaning The Cooking Grates Cleaning the Heat DiffusersCleaning the Grease Tray and Pan Cleaning Exterior SurfacesBurner Flames Cooking Temperature An Important Note About Cooking TemperatureUsing the Back Burner Burn-OffQuestion My grill will not light properly, Why? Answer Questions My electronic ignition is not working AnswerRepair Protection Agreements MY-HOMEIiiiiiiiiiiiiiii¸¸¸,¥o,.rHome