Kenmore 119.1623 Place LP Cylinder into the Cabinet, Hose Support Ring to Cabinet Side Panel

Page 20

Place LP Cylinder into the Cabinet

[] Unhook the cylindersupport ringand hold at top of cabinet.

[] Place the LP cylinderdown intothe tank support hole inthe bottom of the cabinet.Ensure the valve faces to the front.

[] Wrap the cylindersupport ringaround the top of the tank and hook to secure the LP

cylinder in place.

\

m

Attach

Regulator

Hose

Support

Ring to Cabinet

Side

Panel

[]

Remove

the

nut

from

the

bolt

on

the

inside

of the

left

cabinet

side panel,

It's located

towards

the

top

of

the

side panel

near

the

front.

See Inset 1.

[]

Find

the

metal ring

located

on the

hose

of the regulator

assembly

and attach

to the bolt on

the left cabinet side panel securing it with the nut. This will keep the hose away from hot surfaces. See Inset 2.

DO Not Hook Up the LP Cylinder to the Regulator Assembly at this time,

Inset 1

Inset 2

Regulator Hose Support Ring

2O

Image 20

Contents Record Your SERIAL# Date of Purchase Attach Your Sales Receipt HereOne-Year Full Warranty on Kenmore Grill Ten-Year Limited Warranty on Stainless Steel BurnersWarranty Restrictions Sears, Roebuck and Co Hoffman Estates, ILFailuretocomplywiththeseinstructionscould SB0029 QTY Purpose of PartItem No QtyDescription Qty Item No DescriptionItem No Description Qty Page KEY QTYQTY Ill Install Condiment Basket and Cabinet Door Stopper Assemble Side Burner Assembly Grease Pan SupportInstall Side Burner Control Panel to Side Burner Assembly Install Side Burner Assembly to Firebox AssemblySecure Side Burner Assembly to the Firebox Assembly Assemble Side Shelf Assembly \\\\IIIIAssembly Side Shelf Control PanelSecure Side Shelf Assembly to the Firebox Assembly Cabinet Place LP Cylinder into the CabinetHose Support Ring to Cabinet Side Panel Battery Congratulations Assembly in now CompleteCorrect LP GAS Tank USE Use your grill at least 2 feet away fromHow to Leak Test your LP Gas Tank For your safety RegulatorTo Connect the Cylinder to Regulator and Hose Hand Tighten Only, Do Not Use a WrenchDisconnecting a Liquid Propane Gas LPG Tank From Your Grill Flow Limiting Valves on LP Gas TanksTransportation and Storage Check all connections for LP Gas LeaksOT1 Hanuallylighting the Burners with Hatch Holder Hanually Lighting the Side Burner Or the Back BurnerTroubleshooting If the grill fails to light Follow the steps below to reset the flow limiting deviceCleaning The Cooking Grates Cleaning the Heat DiffusersCleaning the Grease Tray and Pan Cleaning Exterior SurfacesBurner Flames Cooking Temperature An Important Note About Cooking TemperatureUsing the Back Burner Burn-OffQuestion My grill will not light properly, Why? Answer Questions My electronic ignition is not working AnswerRepair Protection Agreements MY-HOMEIiiiiiiiiiiiiiii¸¸¸,¥o,.rHome