Kenmore 119.1623 manual Install Condiment Basket and Cabinet Door Stopper

Page 13

Install Condiment Basket and Cabinet Door Stopper

[] Hang the Condiment Basket (L) inside of the Cabinet Right Door (K) as shown.

[] Attach the Cabinet Door Stopper to the Cabinet Bottom Panel using 2 M4x5/16" Phillips Head Bolts and 2 M4 Washers.

Phillips Head Bolt: M4x5/16" (Black)

Qty: 2

Part # SB0009

Washer: M4

Qty: 2

Part # SB0016

Cabinet Door Stopper

Qty: 1

Part # SA0422

Install Firebox Assembly to Cabinet Assembly and Install Grease Tray to Firebox

Assembly

[] Place the Firebox Assembly (I) on the Cabinet Assembly (A). We recommend using 2 people to lift the Firebox Assembly (I).

[] Attach the Firebox Assembly to the Cabinet Assembly using 4 M6x5/8" Phillips head Bolts and 4 M6 Washers. See Inset 1.

[] Slide the Grease Tray (V) along the sides of the Firebox Assembly (I) from the back. Ensure it secures in place behind the two screws on the sides of the cabinet. See Insets 2 and 3.

Phillips Head Bolt: M6x5/8"

Qty: 4

Part # SB0027

Washer: M6

Qty: 4

Part # SB0005

Inset 2

Inset 3

13

Image 13

Contents Date of Purchase Attach Your Sales Receipt Here Record Your SERIAL#Ten-Year Limited Warranty on Stainless Steel Burners One-Year Full Warranty on Kenmore GrillWarranty Restrictions Sears, Roebuck and Co Hoffman Estates, ILFailuretocomplywiththeseinstructionscould QTY Purpose of Part SB0029Qty Item NoDescription Qty Description Item NoItem No Description Qty Page QTY KEYQTY Ill Install Condiment Basket and Cabinet Door Stopper Grease Pan Support Assemble Side Burner AssemblyInstall Side Burner Assembly to Firebox Assembly Install Side Burner Control Panel to Side Burner AssemblySecure Side Burner Assembly to the Firebox Assembly \\\\IIII Assemble Side Shelf AssemblySide Shelf Control Panel AssemblySecure Side Shelf Assembly to the Firebox Assembly Hose Support Ring to Cabinet Side Panel Place LP Cylinder into the CabinetCabinet Congratulations Assembly in now Complete BatteryUse your grill at least 2 feet away from Correct LP GAS Tank USERegulator How to Leak Test your LP Gas Tank For your safetyTo Connect the Cylinder to Regulator and Hose Hand Tighten Only, Do Not Use a WrenchFlow Limiting Valves on LP Gas Tanks Disconnecting a Liquid Propane Gas LPG Tank From Your GrillTransportation and Storage Check all connections for LP Gas LeaksOT1 Hanually Lighting the Side Burner Or the Back Burner Hanuallylighting the Burners with Hatch HolderFollow the steps below to reset the flow limiting device Troubleshooting If the grill fails to lightCleaning the Heat Diffusers Cleaning The Cooking GratesCleaning the Grease Tray and Pan Cleaning Exterior SurfacesBurner Flames An Important Note About Cooking Temperature Cooking TemperatureUsing the Back Burner Burn-OffQuestions My electronic ignition is not working Answer Question My grill will not light properly, Why? AnswerMY-HOME Repair Protection AgreementsIiiiiiiiiiiiiiii¸¸¸,¥o,.rHome