Kenmore 119.1623 manual Secure Side Burner Assembly to the Firebox Assembly

Page 16

Secure Side Burner Assembly to the Firebox Assembly

[] Use 1 Phillips Head Bolt and 1 Washer from inside of the firebox to secure attached Side Burner Assembly as shown.

Phillips Head Bolt: M6x3/8"

Qty: 1

Part # SBO004

Washer: M6

Qty: 1

Part # SBO005

Secure Side Burner Valve and Control Knob to Side Burner Control Panel

[] Insert the side burner valve stem up through the hole in the Side Burner Control Panel

(M). See Inset 1.

[] Insert side burner valve stem into the side burner tube. See Inset 2.

[] Secure the side burner valve to the Side Burner Control Panel (M) using 2 white Philips Head Bolts. Ensure the side burner valve stem is centered in the stem tube of the side

burner.

[] If not, center it, which may involve loosening the 2 Phillips Head Bolts. See Inset 3. Push the Control Knob onto the valve stem. See Inset 3.

Inset 2

Phillips Head Bolt: M4x5/16"

(White) qty: 2

Part # SBOOOgD

Control Knob

Qty:l

Part # FEO015

Inset 1

Inset 3

]6

Image 16

Contents Record Your SERIAL# Date of Purchase Attach Your Sales Receipt HereOne-Year Full Warranty on Kenmore Grill Ten-Year Limited Warranty on Stainless Steel BurnersWarranty Restrictions Sears, Roebuck and Co Hoffman Estates, ILFailuretocomplywiththeseinstructionscould SB0029 QTY Purpose of PartItem No QtyDescription Qty Item No DescriptionItem No Description Qty Page KEY QTYQTY Ill Install Condiment Basket and Cabinet Door Stopper Assemble Side Burner Assembly Grease Pan SupportInstall Side Burner Control Panel to Side Burner Assembly Install Side Burner Assembly to Firebox AssemblySecure Side Burner Assembly to the Firebox Assembly Assemble Side Shelf Assembly \\\\IIIIAssembly Side Shelf Control PanelSecure Side Shelf Assembly to the Firebox Assembly Hose Support Ring to Cabinet Side Panel Place LP Cylinder into the CabinetCabinet Battery Congratulations Assembly in now CompleteCorrect LP GAS Tank USE Use your grill at least 2 feet away fromHow to Leak Test your LP Gas Tank For your safety RegulatorTo Connect the Cylinder to Regulator and Hose Hand Tighten Only, Do Not Use a WrenchDisconnecting a Liquid Propane Gas LPG Tank From Your Grill Flow Limiting Valves on LP Gas TanksTransportation and Storage Check all connections for LP Gas LeaksOT1 Hanuallylighting the Burners with Hatch Holder Hanually Lighting the Side Burner Or the Back BurnerTroubleshooting If the grill fails to light Follow the steps below to reset the flow limiting deviceCleaning The Cooking Grates Cleaning the Heat DiffusersCleaning the Grease Tray and Pan Cleaning Exterior SurfacesBurner Flames Cooking Temperature An Important Note About Cooking TemperatureUsing the Back Burner Burn-OffQuestion My grill will not light properly, Why? Answer Questions My electronic ignition is not working AnswerRepair Protection Agreements MY-HOMEIiiiiiiiiiiiiiii¸¸¸,¥o,.rHome