Kenmore 119.1623 manual Install Side Burner Control Panel to Side Burner Assembly

Page 15

Install Side Burner Control Panel to Side Burner Assembly

[] Attach Side Burner Control Panel (iv]) to Side Burner Assembly Bolts and 2 Washers. Do not use a Washer on the end Bolt.

No Washer

Phillips Head Bolt: M4x5/16"

(Black) Qty: 3

Part # SB0009

Washer:		M4
Qty:	2
Part	#	SB0016

using 3 Phillips Head

With Washer

Install Side Burner Assembly to Firebox Assembly,

[] Loosely screw 2 Phillips Head Bolts (M6x3/8") and 2 Washers into the upper left and right corner holes in the left side of the firebox as shown in Inset 1. Leave 1/4" of the bolts extending out of the firebox sides to attach the side burner brackets. Slide the Side Burner Front and Rear Brackets over the heads of those bolts and tighten.

[] Slide the side burner ignition wire through the hole on the Side Burner Control Panel. See Inset 2

[] Use 2 Phillips Head Bolts (M6x3/8") and 2 Washers to attach the lower holes in the Side Burner Front and Rear Bracket to the Firebox Assembly (t) as shown in Inset 3.

Inset 1

Phillips		Head Bolt: M6x3/8"	Inset 3
Qty:	4
Part	#	SB0004

Washer:		M6	Inset 2
Qty:	4		0
Part	#	SB0005	0

Inset 2

15

Image 15

Contents Date of Purchase Attach Your Sales Receipt Here Record Your SERIAL#Sears, Roebuck and Co Hoffman Estates, IL One-Year Full Warranty on Kenmore GrillTen-Year Limited Warranty on Stainless Steel Burners Warranty RestrictionsFailuretocomplywiththeseinstructionscould QTY Purpose of Part SB0029Qty Item NoDescription Qty Description Item NoItem No Description Qty Page QTY KEYQTY Ill Install Condiment Basket and Cabinet Door Stopper Grease Pan Support Assemble Side Burner AssemblyInstall Side Burner Assembly to Firebox Assembly Install Side Burner Control Panel to Side Burner AssemblySecure Side Burner Assembly to the Firebox Assembly \\\\IIII Assemble Side Shelf AssemblySide Shelf Control Panel AssemblySecure Side Shelf Assembly to the Firebox Assembly Place LP Cylinder into the Cabinet Hose Support Ring to Cabinet Side PanelCabinet Congratulations Assembly in now Complete BatteryUse your grill at least 2 feet away from Correct LP GAS Tank USEHand Tighten Only, Do Not Use a Wrench How to Leak Test your LP Gas Tank For your safetyRegulator To Connect the Cylinder to Regulator and HoseCheck all connections for LP Gas Leaks Disconnecting a Liquid Propane Gas LPG Tank From Your GrillFlow Limiting Valves on LP Gas Tanks Transportation and StorageOT1 Hanually Lighting the Side Burner Or the Back Burner Hanuallylighting the Burners with Hatch HolderFollow the steps below to reset the flow limiting device Troubleshooting If the grill fails to lightCleaning Exterior Surfaces Cleaning The Cooking GratesCleaning the Heat Diffusers Cleaning the Grease Tray and PanBurner Flames Burn-Off Cooking TemperatureAn Important Note About Cooking Temperature Using the Back BurnerQuestions My electronic ignition is not working Answer Question My grill will not light properly, Why? AnswerMY-HOME Repair Protection AgreementsIiiiiiiiiiiiiiii¸¸¸,¥o,.rHome