Install Side Burner Valve
[] Detach side burner ignition wire from the regulator hose. Feed side burner valve and igniter wire through hole in left side of cabinet.
[] Open side burner lid and cut tie wrap securing grate to pan. On underside of pan, remove the 2 screws holding the side burner in place. See Inset 1.
[] Secure the side burner valve stem to the Side Burner Lower Control Panel using 2 Phillips Head
Bolts (M4x8mm). See Inset 2.
[] Center the side burner valve into the side burner tube. See Inset 3. Reattach side burner to pan with 2 previously removed screws.
[] Use 1 Phillips Head Bolt (M4x8mm) to attach the Side Burner Lower Control Panel to the firebox. See Inset 4.
Inset 1
Inset 2
Phillips Head Bolt M4x8mm qty: 3
|
|
|
|
|
|
|
| Inset 4 |
| Inset 3 |
|
|
|
|
|
|
|
|
|
| |
Attach Side | Burner | Control | Knob | and | Side Burner | Ignition | Wire | |||
[] | Attach | the side | burner | ignition wire over the side | burner connector pin. | |||||
[] | Push | the | Control | Knob | onto | the | valve | stem. |
|
|
ld