Install | Heat | Diffusers, | Cooking Grates, Warming | Rack | into | the | indentations | in | the front | and | |||||||||||
[] | Insert | the |
| heat diffusers | into | the | firebox | by placing |
| them | |||||||||||
| back |
| of the | firebox. | See | Inset | 1. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
[] | Place | the | Cooking | Grates | into | the | firebox. | The grate | bottoms | have | a | small | knob | on | each corner. | ||||||
| See |
| Inset |
| 2. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[] | Insert | the |
| warming | rack | into | the top of the firebox. |
| See | Inset | 3. The | raised | lip | goes | towards | the | |||||
| back |
| of the | firebox. | See | Inset | 3. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Inset 1
Inset 3
Inset 2
[]PlaceUnscrewand Securethe boltLPandCylindernut locatedinto belowtheCabinetthe large opening in the left side cabinet panel. Attach the regulator hose support ring, located on the regulator hose, to the left side cabinet panel using the same bolt and nut. See Inset 1
[] Hook the ends of the Cylinder Support Ring into the two holes in the left front and rear legs.
See Inset 2. Note: You may need to spread the ends apart for the ring to reach and securely fit into the holes.
[] Place the LP cylinder down into the tank support hole in the bottom of the cabinet. Ensure the valve faces to the side. Wrap the Cylinder Support Ring around the top of the tank and hook together to secure the LP cylinder in place. See Inset 3.
Do Not Hook Up the LP Cylinder to the Regulator Assembly at this time.
Inset 1
mmm
Inset 2
17