Grill Lighting Instructions

1.Before each use, check all hoses for cracks,

nicks,

cuts,

abrasions.

hose

damaged

any way,

not

use

your grill

before

replacing

the

hose

with

authorized

part

from

the

Parts

List.

Also

make

sure all

gas supply

connections

are

securely

tightened.

Familiarize

yourself

with

the

Safety

and

Use

and

Care

instructions

this

manual.

not

smoke

while

lighting

the

grill

checking

gas

supply

connections.

3.Be sure the LP gas tank has gas.

4.Open the grill lid.

Failure to replace a faulty hose, secure gas

supply connections, or to open the lid before

proceeding to the Lighting Procedures could

result in a fire or explosion that could cause

serious bodily injury, death, or property damage.

5.Set control knobs to OFF and open the LP gas tank valve SLOWLY.

Low

6.Push and turn any control knob to "Hi".

Low

7. Immediately press the electronic ignition button for 3-5 seconds to light the burner.

You should hear a clicking sound which

shows the electronic ignition is working. If

the burner does not light within 5 seconds,

turn the burner control knob to "OFF". Wait

5 minutes for the gas to clear, and repeat the above procedure.

8.Once one burner is lit, an adjacent burner

can be lit by turning its control knob to "Hi".

9.When lit, turn the control knob to its

desired setting.

Rotisserie

Burner

Electric

Ignition

Main Burner

Side Burner and Rotisserie Burner

Lighting Instructions

1, Follow steps 1 through 3 of the Grill Lighting Instructions.

2.Open the grill lid or side burner cover.

3.Set control knobs to OFF and open the LP gas tank valve SLOWLY

4.Push and turn the control knob to "Hi".

5, Immediately press the electronic ignition button for 3-5 seconds to light the burner. You should hear a clicking sound which shows the electronic ignition is working.

6, If the burner does not light within 5 seconds, turn the burner control knob to "OFF". Wait 5 minutes for the gas to clear, and repeat the above procedure.

7, Continue to press in and hold the rotisserie

burner control knob for 5 to 7 seconds

once lit to activate the safety flame sensor. Failure to do so will cause gas to be shut off to the rotisserie burner and the burner will go out.

Side Burner