DO NOT light this grill without first reading
the Lighting Instructions.
DO NOT light this grill without checking the
burner tubes for blockage that could have
occurred during shipment. See the Cleaning
and Maintenance Instructions.
•DO NOT use any type of charcoal in this grill.
•DO NOT operate the main burners and back
burner | at the | same | time. | (If Equipped) | |
• ALWAYS | inspect | the | grease | tray before each | |
use. Remove | and | clean as | necessary. | ||
This outdoor cooking gas appliance is not intended
to be installed in or on boats or recreational vehicles.
Liquid Propane Gas (LPG) grills must be used with the liquid propane gas regulator assembly supplied. This grill is not convertible to natural gas.
ALWAYS keep the gas hose assembly away from any heated surface and dripping grease. Avoid unnecessary twisting of the hose. Visually inspect the hose prior to each use for cuts, cracks, excessive wear, or other damage. Do not use the gas grill if the hose appears damaged. Call Sears at
The installation must conform with local codes or,
in the absence of local codes, with either the
National Fuel Gas Code, ANSI Z223.1/NFPA 54,
or CAN/CGA B149.1, Natural Gas and Propane
Installation Code, or Propane Storage and
Handling Code, B149.2.
All electrical accessories (such as a rotisserie or
light) must be electrically grounded in accordance
with local codes, or in the absence of local codes,
with the National Electrical Code, ANSI/NFPA 70,
or the Canadian Electrical Code, CSA C22.1. Keep
any electrical cords away from hot surfaces.
•NEVER use your gas grill in a building, garage, porch, shed, breezeway or any other enclosed area.
•NEVER obstruct the flow of ventilation air around your gas grill cabinet.
•DO NOT leave children and pets unattended in the area when the grill is in operation.
•ENSURE the grill is on a level surface when in operation. You can adjust the feet in front to level and stabilize the grill.
•NEVER attach an unregulated gas line to this appliance.
PRE-ASSEMBLY
•Two people will be necessary to assemble the larger parts of the grill.
•Lay a cardboard sheet on the floor and use as a work surface to protect floor and grill parts from scratches.
•Once all parts are removed and unpacked,
use the Hardware and Part Diagrams to ensure all items are included and free of damage.