6Assembly Instructions Beefeater Barbecues
Assembly Notes
Before any assembly or installation is attempted it is important that you check for damage or missing parts. Your dealer or the manufacturer must be notified of any problems immediately before proceeding.
The main frame of the barbecue has been factory assembled requiring only the following simple steps for completion. Check the “Gas Type “ label attached to barbecue and side burner to be certain this gas type is the one required for your use eg. Propane / LPG or Natural Gas. See Fig 5.
Trolleys, roasting hoods and side burners are optional so read this manual in conjunction with the manual that comes with each accessory before attaching any other components. Attach the roasting hood last of all.
Fig 6
Assembly Procedure
Heat Reflectors, Burners And Vaporizers
The modular Vaporizer Grid system has been designed to maximise the performance of your BeefEater barbecue
The reflectors fit between each burner. They reflect heat from the burners, upwards to the cooking surfaces.
The Vaporizers are designed to vaporise fats and juices from the meat. One Vaporizer is fitted over each burner that is located under the grill. The Vaporizers reduce
How Many Vaporizers And Reflectors Are There?
Model | Vaporizer | Reflector |
2 Bnr: | 2 | 1 |
3 Bnr: | 2 | 2 |
4 Bnr: | 3 | 3 |
5 Bnr: | 3 | 4 |
Fig 7 | Upper slots for Vaporizers |
Lower slots for heat reflectors