Also, each Internet Information Server (IIS) version 3.0 Virtual Root configured for fail- over also needs a static IP address.
1DPLQJDQG)RUPDWWLQJ6KDUHG'ULYHV
The logical drives of the shared storage subsystem must be assigned drive letters and then formatted as Windows NT File System (NTFS) drives. The assigned drive letters must be identical on both nodes.
NOTE: Because the number of drive letters required by individual nodes in a cluster may vary, Dell recommends that you name the shared drives in reverse alphabetical order beginning with the letter z.
Use the following procedure to assign drive letters and format drives:
1.Click the Start button, point to Programs, point to Administrative Tools (Com- mon), and click Disk Administrator.
2.At the confirmation dialog box, click Yes to enter a signature on all new physical or logical drives.
3.Find the disk icon for the first unnamed, unformatted drive,
4.In the dialog box, create a partition the size of the entire drive (the default) and click OK.
5.Click Yes to confirm the partition.
6.With the pointer on the same icon,
7.Type the letter you want to assign to the drive (for example, z), and click OK.
8.Highlight and
9.Click Yes to save the changes.
10.Click Yes to confirm that changes were made.
11.
12.At the dialog box, change the file system to NTFS, click Quick Format, and click Start.
13.Click OK at the warning.
14.Click OK to acknowledge that formatting is complete.
15.Click Close to close the dialog box.
16.Repeat steps 3 through 15 for each remaining drive.
17.Close the Disk Administrator dialog box.
Configuring the Cluster Software |