7DEOH7URXEOHVKRRWLQJFRQWLQXHG
3UREOHP | 3UREDEOH&DXVH | &RUUHFWLYH$FWLRQ |
|
|
|
Attempts to connect to a clus- | The Cluster Service has not | Verify that the Cluster Service has been |
ter using Cluster Administrator | been started, a cluster has | started and that a cluster has been |
fail. | not been formed on the sys- | formed. Use the Event Viewer and look |
| tem, or the system has just | for the following events logged by the |
| been booted and services | Cluster Service: |
| are still starting. |
|
|
| Microsoft Cluster Server suc- |
|
| cessfully formed a cluster on |
|
| this node. |
|
| or |
|
| Microsoft Cluster Server suc- |
|
| cessfully joined the cluster. |
|
| If these events do not appear, refer to the |
|
| Microsoft Cluster Server Administrator’s |
|
| Guide for instructions on setting up the |
|
| cluster on your system and starting the |
|
| Cluster Service. |
|
|
|
You are prompted to configure | The Transmission Control | The |
one network instead of two | Protocol (TCP)/IP configura- | must be assigned static IP addresses on |
during Microsoft Cluster Server | tion is incorrect. | different subnets. See “Installing and Con- |
installation. |
| figuring Additoinal NICs in a Cluster” in |
|
| Chapter 3 of this guide for information |
|
| about assigning the network IPs. |
You are unable to administer the cluster from a remote system.
The remote system is running Service Pack 3 and you are trying to administer a cluster running Service Pack 4.
Upgrade the remote system to Service Pack 4 or administer the cluster from a system running Service Pack 4.
Troubleshooting