Frigidaire Electric Patio Grill manual Side Burner Assembly

Side Burner Assembly

1.Attach the Side Burner to the grill by inserting the shelf hooks into the slots on the side of the grill and pushing down on the shelf assembly until level with the grill

(See Fig. 19)

2.Lock the Side Burner in place by re-inserting

(2)hex head screws in the front & rear edge of side burner. (See Fig. 20)

Note: A power screwdriver extension is needed to insert screw.

3.Attach the Flex Line coming from the side of the grill to the fitting on the bottom of the Side Burner. (See Fig. 21)

4.Attach the ignitor wire coming out from the side of the grill to the side burner ignitor point. (See Fig. 22)

9

Fig. 19

Fig. 20

SCREW HOLE

Attach to fitting

Fig. 21

Ignitor wire hookup

Fig. 22