Trane PKGP-PRC003-EN Black Epoxy Pre-Coated Coils, Cabinet Integrity, CO2 Sensing, Compressors

Page 6

Features and Benefits

Outstanding Standard and Optional Components

Black Epoxy Pre-Coated Coils

The pre-coated coils are an economical option for protection in mildly corrosive environments.

Cabinet Integrity

For added water integrity, Precedent has a raised 11/8" lip around the supply and return of the downflow units to prevent water from blowing into the ductwork.

Clogged Filter/Fan Failure Switch

A dedicated differential pressure switch is available to achieve active fan failure indication and/or clogged filter indication.

These sensors allow a zone sensor service light or Integrated Comfort System to indicate a dirty filter or a fan that’s not working.The field installation charges for these valuable feedback devices often eliminate them from consideration. Factory installation can make such features a good investment.

CO2 Sensing

The CO2 sensor has the ability to monitor space occupancy levels within the building by measuring the parts per million of CO2 (Carbon Dioxide) in the air. As the CO2 levels increase, the outside air damper modulates to meet the CO2 space ventilation requirements.The CO2 sensor kit is available as a field installed accessory.

ColoredAnd NumberedWiring

Save time and money tracing wires and diagnosing the unit.

Compressors

Precedent contains the best compressor technology available to achieve the highest possible performance. Our compressor line includes reciprocating and scrolls.

Condenser Coil

Precedent boasts a patent-pending 1+1+1 condenser coil, permanently gapped for easy cleaning.

Digital Display Zone Sensor

The Digital LCD (Liquid Crystal Display) zone sensor has the look and functionality of standard zone sensors. This sensor should be utilized with ReliaTel™ controls.

Discharge Air Sensing Kit

Provides true discharge air sensing in heating models. The kit is functional only with the ReliaTel Options Module.

DownflowAnd Horizontal Economizers The economizers come with three control options — dry bulb is standard, enthalpy and differential enthalpy are optional.

DualThermistor Remote Zone Sensor This sensor will reduce the total number of remote sensors to obtain space temperature averaging. This sensor should be utilized with ReliaTel controls.

Foil-Faced Insulation

All panels in the evaporator section of the unit have cleanable foil-faced insulation. All edges are either captured or sealed to ensure no fibers get into the airstream.

Factory Built Roof Curbs

Only two roof curbs for the entire Precedent line simplifies curb selection.

Flexibility

Units are built to order in our standard “shortest in the industry” ship cycle time.

Fresh Air

0 - 25% manual or 0 - 50% motorized outside air hoods are available.

6

PKGP-PRC003-EN

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Packaged Heat Pumps Introduction American Standard Inc. All Rights ReservedContents Features Benefits Factory Installed Options Field Installed OptionsFactory or Field Installed Options Features and Benefits Easy to Install, Service and MaintainQuality and Reliability Black Epoxy Pre-Coated Coils Clogged Filter/Fan Failure SwitchColoredAnd NumberedWiring Cabinet IntegrityQuick-Access Panels Phase MonitorPower Exhaust Option Quick-Adjust Idler ArmUnit Cabinet Rigorous TestingVentilation Override Accessory VariTracEasy to Install Added Efficiency Clearance Requirements Barometric ReliefCondensate Trap Unit PitchAir Delivery Selection Cooling CapacityHeating Capacity StepModel Number Description 036 11 12,13General DataTable GD-1 General Data OutdoorSoundRatingdB3 Outdoor Coil -Type General DataTable GD-2 General Data Outdoor Fan TypeEER2 ½, 10TonTable GD-3 General Data Outdoor Fan- TypePerformance Data MBH SHCMBH SHC MBH SHC MBH SHC Ton Three Phase WSC060A1,A3, A4, AW Performance½ Ton Three Phase Ton Three PhaseMBH SHC MBH SHC MBH SHC MBH SHC MBH WSC048A WSC036AHorizontal WSC060AData3Ton Table PD-8Table PD-9 Table PD-11 Data4TonTable PD-10 HP Standard Motor & Field SuppliedTable PD-13 Data5TonTable PD-12 HP Standard Motor & Drive Low Static DriveData6Ton Table PD-14Table PD-15 Table PD-17 Data7½TonTable PD-16 HP Oversized Motor& Field Supplied Sheave2Table PD-19 Data10 TonTable PD-18 HP Standard Motor & Drive HP Oversized Motor & DriveWSC072A Table PD-20- Standard Motor & Sheave/Fan Speed RpmTable PD-22 Oversized Motor & Drive Sheave/Fan Speed Rpm WSC090ATable PD-25 Outdoor Sound Power Level dB ref -12Watts WSC072A WSC090A WSC120AHeating Capacities Net WSC036A1 At 1200 CFM At 1200 CFMHeating Capacities Net WSC048A1 At 1600 CFM At 1600 CFMHeating Capacities Net WSC60A1 At 2000 CFM At 2000 CFMWSC72A At 3000 CFM Downflow Configuration WSC120A Table PD-38 Auxiliary Electric Heat Capacity Nominal Distribution6Ton ½ Ton 10Ton 2000 3000 CFM WS120A3,A4,AW14.2 18.00 28.5 19.0 27.00 42.7 21.3 36.00 56.9 37.9 54.00 Controls ReliaTel Controlled UnitsTable ED-1 Unit Wiring Electrical Data208/230 Volts Single Phase 208/230 Volts Three PhaseVolts Three Phase BAYHTR306A FLA LRA Table ED-8 Electrical Characteristics Power Exhaust AMPS1 AmpsHP2 RPM RLA LRA Zone Sensors -Typical Number Of Wires Jobsite ConnectionsDimensional Data TonsDimensional DataDimensional Data 7½ Tons WSC072A and WSC090A Tons -WSC120ASupply Tons Unit Clearance and Roof OpeningTons Roof Curb Tons Downflow Duct Connections Field FabricatedTons Economizer, Manual, or Motorized Data AccessoriesSee Page 46 forThrough the Base Utilities Information Fresh Air DamperSee Page 48 forThrough the Base Utilities Information Weights Table W-2 Factory-installed Options Net Weights Lbs1,2Mechanical Specifications Factory Installed Options Factory or Field Installed OptionsField Installed Options PL-UN-PKGP-WSC 3-10TONS-PRC003-EN-09-04 PL-UN-PKGP-WSC 3-10TONS-PRC003-EN-02-04

PKGP-PRC003-EN specifications

The Trane PKGP-PRC003-EN is a high-performance packaged rooftop unit designed to provide efficient heating, cooling, and ventilation solutions for a wide variety of commercial applications. Its innovative design encompasses advanced technologies aimed at improving energy efficiency and overall operational efficiency.

One of the standout features of the PKGP-PRC003-EN is its highly efficient variable speed compressor. This technology allows the unit to modulate its capacity based on the specific needs of the environment, ensuring optimal comfort levels while reducing energy consumption. Coupled with a robust fan system, the unit can maintain precise temperature control in fluctuating weather conditions, providing reliable comfort year-round.

The unit's advanced controls use a user-friendly interface that simplifies operation and monitoring. These controls can be integrated with building management systems (BMS), allowing for seamless connectivity and enhanced control over the HVAC system. With the capability for remote monitoring, facility managers can track performance metrics and receive alerts for maintenance, ensuring that the unit operates efficiently and minimizes downtime.

In terms of design, the PKGP-PRC003-EN is equipped with durable construction materials that withstand outdoor environments, ensuring a long lifespan with minimal maintenance. The unit’s compact footprint allows it to fit in tight spaces on rooftops, making it an ideal choice for urban environments where space is limited.

Furthermore, the Trane PKGP-PRC003-EN incorporates advanced filtration systems to improve indoor air quality. These filters effectively capture dust, pollen, and other allergens, contributing to a healthier indoor environment. The unit is also designed with sound attenuation features, minimizing operational noise, which is particularly beneficial for installations in noise-sensitive areas.

Overall, the Trane PKGP-PRC003-EN sets a high standard in the realm of rooftop HVAC solutions. Its combination of energy efficiency, smart control capabilities, and robust construction makes it a reliable choice for businesses looking to enhance their indoor climate while being mindful of operational costs. The integration of advanced technologies ensures that it not only meets but exceeds the expectations of modern HVAC performance, all while maintaining user-friendly operation and maintenance.
Top Page Image Contents