Trane PKGP-PRC003-EN manual Easy to Install

Page 9

Features and Benefits

Easy to Install

Convertible Units

–The units ship in a downflow configuration.They can be easily converted to horizontal by simply moving two panels.

–Units come complete with horizontal duct flanges so the contractor doesn’t have to field fabricate them.These duct flanges are a time and cost saver.

Easy Access LowVoltageTerminal Board Precedent’s Low VoltageTerminal Board is external to the electrical control cabinet. It is extremely easy to locate and attach the thermostat wire and test operation of all unit functions.This is another cost and time saving installation feature.

LowVoltage Connections

The wiring of the low voltage connections to the unit and the zone sensors is as simple as 1-1, 2-2, and 3-3.This simplified system makes it easy for the installer to wire.

Electric Heaters

Electric heat modules are available within the basic unit. If ordering theThrough the Base Electrical option with an Electrical Heater, the heater must be factory installed.

Powered or Unpowered Convenience Outlet

This option is a GFCI, 120v/15amp, 2 plug, convenience outlet, either powered or unpowered.This option can only be ordered when theThrough the Base Electrical with either the Disconnect Switch, or Circuit Breaker, option is ordered.

Single Point Power

A single electrical connection powers the unit.

Single Side Service

Single side service is standard on all units.

Through the Base Condensate

Every unit includes provisions for through the base condensate drain connections. This allows the drain to be connected through the roof curb instead of a roof penetration.

Through the Base Electrical Utility Access

Factory provided through the base openings simplify wiring and piping. Because these utility openings frequently minimize the number of roof penetrations, the integrity of roofing materials is enhanced.

Through the Base Electrical with Circuit Breaker

This option is a factory installed thermal magnetic, molded case, HACR Circuit Breaker with provisions for through the base electrical connections.

PKGP-PRC003-EN

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Packaged Heat Pumps American Standard Inc. All Rights Reserved IntroductionContents Features Benefits Factory Installed Options Field Installed OptionsFactory or Field Installed Options Features and Benefits Easy to Install, Service and MaintainQuality and Reliability ColoredAnd NumberedWiring Clogged Filter/Fan Failure SwitchBlack Epoxy Pre-Coated Coils Cabinet IntegrityPower Exhaust Option Phase MonitorQuick-Access Panels Quick-Adjust Idler ArmVentilation Override Accessory Rigorous TestingUnit Cabinet VariTracEasy to Install Added Efficiency Condensate Trap Barometric ReliefClearance Requirements Unit PitchHeating Capacity Cooling CapacityAir Delivery Selection Step036 11 12,13 Model Number DescriptionGeneral DataTable GD-1 General Data Table GD-2 General Data General DataOutdoorSoundRatingdB3 Outdoor Coil -Type Outdoor Fan TypeTable GD-3 General Data ½, 10TonEER2 Outdoor Fan- TypePerformance Data MBH SHCMBH SHC MBH SHC MBH SHC Performance Ton Three Phase WSC060A1,A3, A4, AW½ Ton Three Phase Ton Three PhaseMBH SHC MBH SHC MBH SHC MBH SHC MBH Horizontal WSC036AWSC048A WSC060AData3Ton Table PD-8Table PD-9 Table PD-10 Data4TonTable PD-11 HP Standard Motor & Field SuppliedTable PD-12 Data5TonTable PD-13 HP Standard Motor & Drive Low Static DriveData6Ton Table PD-14Table PD-15 Table PD-16 Data7½TonTable PD-17 HP Oversized Motor& Field Supplied Sheave2Table PD-18 Data10 TonTable PD-19 HP Standard Motor & Drive HP Oversized Motor & DriveTable PD-22 Oversized Motor & Drive Sheave/Fan Speed Rpm Table PD-20- Standard Motor & Sheave/Fan Speed RpmWSC072A WSC090AWSC072A WSC090A WSC120A Table PD-25 Outdoor Sound Power Level dB ref -12WattsAt 1200 CFM Heating Capacities Net WSC036A1 At 1200 CFMAt 1600 CFM Heating Capacities Net WSC048A1 At 1600 CFMAt 2000 CFM Heating Capacities Net WSC60A1 At 2000 CFMWSC72A At 3000 CFM Downflow Configuration WSC120A Nominal Distribution Table PD-38 Auxiliary Electric Heat Capacity6Ton ½ Ton 10Ton 2000 3000 CFM WS120A3,A4,AW14.2 18.00 28.5 19.0 27.00 42.7 21.3 36.00 56.9 37.9 54.00 ReliaTel Controlled Units ControlsElectrical Data Table ED-1 Unit Wiring208/230 Volts Three Phase 208/230 Volts Single PhaseVolts Three Phase BAYHTR306A FLA LRA Table ED-8 Electrical Characteristics Power Exhaust AMPS1 AmpsHP2 RPM RLA LRA Jobsite Connections Zone Sensors -Typical Number Of WiresData Tons DimensionalData Dimensional7½ Tons WSC072A and WSC090A Tons -WSC120A Dimensional DataTons Unit Clearance and Roof Opening SupplyTons Downflow Duct Connections Field Fabricated Tons Roof CurbSee Page 46 forThrough the Base Utilities Information Data AccessoriesTons Economizer, Manual, or Motorized Fresh Air DamperSee Page 48 forThrough the Base Utilities Information Table W-2 Factory-installed Options Net Weights Lbs1,2 WeightsMechanical Specifications Factory or Field Installed Options Factory Installed OptionsField Installed Options PL-UN-PKGP-WSC 3-10TONS-PRC003-EN-02-04 PL-UN-PKGP-WSC 3-10TONS-PRC003-EN-09-04

PKGP-PRC003-EN specifications

The Trane PKGP-PRC003-EN is a high-performance packaged rooftop unit designed to provide efficient heating, cooling, and ventilation solutions for a wide variety of commercial applications. Its innovative design encompasses advanced technologies aimed at improving energy efficiency and overall operational efficiency.

One of the standout features of the PKGP-PRC003-EN is its highly efficient variable speed compressor. This technology allows the unit to modulate its capacity based on the specific needs of the environment, ensuring optimal comfort levels while reducing energy consumption. Coupled with a robust fan system, the unit can maintain precise temperature control in fluctuating weather conditions, providing reliable comfort year-round.

The unit's advanced controls use a user-friendly interface that simplifies operation and monitoring. These controls can be integrated with building management systems (BMS), allowing for seamless connectivity and enhanced control over the HVAC system. With the capability for remote monitoring, facility managers can track performance metrics and receive alerts for maintenance, ensuring that the unit operates efficiently and minimizes downtime.

In terms of design, the PKGP-PRC003-EN is equipped with durable construction materials that withstand outdoor environments, ensuring a long lifespan with minimal maintenance. The unit’s compact footprint allows it to fit in tight spaces on rooftops, making it an ideal choice for urban environments where space is limited.

Furthermore, the Trane PKGP-PRC003-EN incorporates advanced filtration systems to improve indoor air quality. These filters effectively capture dust, pollen, and other allergens, contributing to a healthier indoor environment. The unit is also designed with sound attenuation features, minimizing operational noise, which is particularly beneficial for installations in noise-sensitive areas.

Overall, the Trane PKGP-PRC003-EN sets a high standard in the realm of rooftop HVAC solutions. Its combination of energy efficiency, smart control capabilities, and robust construction makes it a reliable choice for businesses looking to enhance their indoor climate while being mindful of operational costs. The integration of advanced technologies ensures that it not only meets but exceeds the expectations of modern HVAC performance, all while maintaining user-friendly operation and maintenance.
Top Page Image Contents