Weber 625 manual Check for GAS Leaks

Page 11

CHECK FOR GAS LEAKS (CONTINUED)

Pull the front panel up and out of the cooking box assembly. Figure 21.

Front panel

Figure 21

DANGER

Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for leaks. This will result in a fire or explosion which can cause serious bodily injury or death and damage to property.

WARNING: You should check for gas leaks every time you disconnect and reconnect a gas fitting.

You will need: a soap and water solution and a rag or brush to apply it.

Note: Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checking for leaks.

Warning: Make sure all burner control knobs are in the OFF position, including the side burner, if the barbecue has a side burner.

Turn on gas supply.

11

Image 11
Contents Summit 425 Summit 450 General Specifications for Piping Install GAS Supply Cart Installations onlySupplies Needed ContentsTools Needed Remove Packaged ADD Cooking Module Remove Packaged ContentsADD Right Panel Mount Regulator BracketConnect Flexible Hose to Regulator Install Flavorizer BarsADD Cooking Grates Install STEAM-N-CHIPS SmokerInstall Bottom Tray Install WARM-UP BasketInstall Burner Control Knobs Install Bottom Shelves Check for GAS Leaks Install Condiment Holders and Work SurfacesCheck for GAS Leaks Manifold Reinstall Front Panel Reinstall Burner Control Knobs Reinstall Control PanelRefer to Operating Guide Before Lighting Barbecue Install Tool Holders