Weber 625 manual Reinstall Control Panel, Reinstall Burner Control Knobs

Page 14

REINSTALL CONTROL PANEL

You will need: control panel.

Pull igniter buttons up until they stay in the up position. Place the control panel into the grooves on either side of the front of the cooking box. Push the control panel into place, using even pressure while pushing. Figure 25 (a).

Use your fingers to lift the front edge of the control panel slightly and set it into the recess on both sides of the cooking box. Figure 25.

(a)

Front Panel

Control Panel

Figure 25

REINSTALL BURNER CONTROL KNOBS

You will need: four (Summit 425 or 450) or six (Summit 625 or 650) burner control knobs.

Push on the burner control knobs. Figure 26.

Figure 26

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Summit 425 Summit 450 Install GAS Supply Cart Installations only General Specifications for PipingSupplies Needed ContentsTools Needed Remove Packaged Remove Packaged Contents ADD Cooking ModuleMount Regulator Bracket ADD Right PanelInstall Flavorizer Bars Connect Flexible Hose to RegulatorInstall STEAM-N-CHIPS Smoker ADD Cooking GratesInstall Bottom Tray Install WARM-UP BasketInstall Burner Control Knobs Install Bottom Shelves Install Condiment Holders and Work Surfaces Check for GAS LeaksCheck for GAS Leaks Manifold Reinstall Front Panel Reinstall Control Panel Reinstall Burner Control KnobsInstall Tool Holders Refer to Operating Guide Before Lighting Barbecue
Top Page Image Contents