Weber 625 manual Manifold

Page 12

CHECK FOR GAS LEAKS (CONTINUED)

Check for leaks by wetting the connections with the soap and water solution and watching for bubbles. If bubbles form or if a bubble grows there is a leak.

WARNING: Do not ignite burners when leak checking.

a)

c)

Manifold

d)

Summit 425 or

Summit 450

Manifold

Figure 22

b)

a)

c)

Manifold

d)

Manifold

Summit 625 or

Summit 650

Figure 22

Check:

a)Left valves to manifold connection. Figure 22 (a).

b)Center valves to manifold connection. Figure 22 (b). (For Summit 625 or 650 only.)

c)Right valves to manifold connection. Figure 22 (c).

d)Gas line to manifold connection. Figure 22 (d)

WARNING: If there is a leak at connection 22 (d), turn OFF the gas and retighten the fitting with a wrench and recheck for leaks with soap and water solution.

If a leak persists after retightening the fitting, turn OFF the gas. DO NOT OPERATE THE BARBECUE. Contact your dealer.

12

Image 12
Contents Summit 425 Summit 450 Install GAS Supply Cart Installations only General Specifications for PipingContents Tools Needed Remove PackagedSupplies Needed Remove Packaged Contents ADD Cooking ModuleMount Regulator Bracket ADD Right PanelInstall Flavorizer Bars Connect Flexible Hose to RegulatorInstall STEAM-N-CHIPS Smoker ADD Cooking GratesInstall WARM-UP Basket Install Burner Control KnobsInstall Bottom Tray Install Bottom Shelves Install Condiment Holders and Work Surfaces Check for GAS LeaksCheck for GAS Leaks Manifold Reinstall Front Panel Reinstall Control Panel Reinstall Burner Control KnobsInstall Tool Holders Refer to Operating Guide Before Lighting Barbecue