Weber 625 manual Connect Flexible Hose to Regulator, Install Flavorizer Bars

Page 6

CONNECT FLEXIBLE HOSE TO REGULATOR

You will need: the 12 foot natural gas supply hose and a 3/4 inch or adjustable wrench.

Thread fitting end of hose onto regulator. Figure 7. Tighten with wrench.

a)

Regulator

Gas supply

hose

b)

Regulator

Gas supply

hose

Figure 7

INSTALL FLAVORIZER BARS

You will need: seven (Summit 425 or 450) or eleven (Summit 625 or 650) flavorizer bars

Set the Flavorizer bars front to back over the burners in the slots of the Flavorizer Bar/cooking grill support. Figure 8 (a).

Flavorizer Bar/ cooking grill support

Summit 425 or

Summit 450

Flavorizer Bar

Slot

Summit 625 or

Summit 650

Figure 8

6

Image 6
Contents Summit 425 Summit 450 Install GAS Supply Cart Installations only General Specifications for PipingContents Tools Needed Remove PackagedSupplies Needed Remove Packaged Contents ADD Cooking ModuleMount Regulator Bracket ADD Right PanelInstall Flavorizer Bars Connect Flexible Hose to RegulatorInstall STEAM-N-CHIPS Smoker ADD Cooking GratesInstall WARM-UP Basket Install Burner Control KnobsInstall Bottom Tray Install Bottom Shelves Install Condiment Holders and Work Surfaces Check for GAS LeaksCheck for GAS Leaks Manifold Reinstall Front Panel Reinstall Control Panel Reinstall Burner Control KnobsInstall Tool Holders Refer to Operating Guide Before Lighting Barbecue