10 | GAS INSTRUCTIONS |
|
REINSTALL CONTROL PANEL
Parts required: control panel, screws, and burner control knobs.
Place the control panel back onto the control panel brackets on either side of the front of the cooking box.
Line up screws with screw holes on both the control panel and control panel brackets. Tighten screws.
Reinstall burner control knobs & igniter wires (if necessary).
Place corresponding control knobs down onto the valve stems. From the underside of the control panel, replace the two wires (1, 2) of each igniter.
(1)
(2)
Gold A4
- | + |
- | + |
a b
a = Yellow Tab with Black Wire b = White Tab with Black Wire
Gold B4
- | + |
- | + |
a | c | d |
| b | |
|
|
a = Yellow Tab with Black Wire b = White Tab with Black Wire c = Solid White Wire
d = Grounding Wire
Gold D4
| - | + |
|
|
| - | + |
|
|
|
| a | c e f | |
|
|
| b | d |
|
|
|
| |
a | = | Blue Tab with Black Wire | ||
b | = | Yellow Tab with Black Wire | ||
c | = | White Tab with Black Wire | ||
d | = | Solid White Wire | ||
e | = | Solid Blue Wire |
| |
f | = | Grounding Wire |
| |