Weber 3400 NG, 2200 NG manual Lighting the Side Burner, For the Platinum Series II 3200

Page 8

LIGHTING THE SIDE BURNER

For the Platinum Series II 3200 & 3400

The side burner has a separate ignition system from the main cooking box.

mDANGER

Failure to open lid while igniting the side burner, or not waiting 5 minutes to allow gas to clear if the side burner does not light, may result in an explosive flame-up which can cause serious bodily injury or death.

Lighting only the side burner. Figure 3.

1)Open the side burner lid.

2)Check that the side burner valve is OFF (push in and turn clockwise), and all main burner control knobs are OFF (push down and turn clockwise).

3)Turn the gas supply on.

4)Push in and turn the side burner control knob to HI.

5)Push the side burner igniter button several times so it clicks each time.

mCAUTION: Side burner flame may be difficult to see on a bright sunny day.

mWARNING: If the side burner does not light:

a)Turn off the side burner control valve.

b)Wait 5 minutes to let the gas clear before you try again or try to light with a match.

mWARNING: The container and contents used on the side burner should not exceed a maximum of 50 pounds. The diameter should not exceed

14 inches in diameter.

1

2

4

5

Figure 3

 

 

 

8

Image 8
Contents Platinum Series Serial NumberTable of Contents MDANGER For Installation in Canada Natural Gas Supply TestingStandards and Codes Information Operating AreaWarranty Word of ThanksLighting the Main Burners To ExtinguishTurn gas supply OFF at the source, then push down Turn each burner control knob clockwise to OFFManual Lighting Lighting only the side burner. Figure Lighting the Side BurnerFor the Platinum Series II 3200 Cleaning CookingUsing the STEAM-N-CHIPS Smoker To use the Steam-N-Chips SmokerSpider Stopper Guards MaintenanceInspection and Cleaning of the Spider Stopper Guards Main Burner Cleaning Procedure MCAUTION Do not enlarge the burner ports when cleaningMain Burner Flame Pattern Replacing Main BurnersCheck proper assembly before fastening manifold in place. b Crossover Ignition System OperationsTroubleshooting Side Burner Troubleshooting Flame is large or erraticSide Burner Maintenance To Clean the Burner Head Side Burner Exploded ViewTo Reassemble the Burner Head MCAUTION Avoid getting water or dust in the burner orificePlatinum Series II 2200 Natural GAS Exploded View Platinum Series II 2200 Natural GAS Replacement Parts List MWARNINGPlatinum Series II 3200 Natural GAS Exploded View Platinum Series II 3200 Natural GAS Replacement Parts List Platinum Series II 3400 Natural GAS Exploded View Platinum Series II 3400 Natural GAS Replacement Parts List Patents and Trademarks
Related manuals
Manual 16 pages 7.64 Kb