Weber 1200 owner manual Troubleshooting, Burner does not light, or flame is low in High position

Page 29

TROUBLESHOOTING

Problem

Check

Cure

 

 

 

Burners burn with a yellow or orange flame, in conjunction with the smell of gas.

Inspect Weber Spider Stopper

Clean Weber Spider Stopper

Guards for possible obstructions.

Guards. (See Section "Annual

(Blockage of holes.)

Maintenance".)

Burner does not light, or flame is low in HIGH position.

Is fuel hose bent or kinked?

Straighten fuel hose.

 

 

Does the Front burner light with a

If you can light the Front

match?

burner with a match, then

 

check the Crossover Ignition

 

System.

Experiencing flare-ups:

mCAUTION: Do not line the bottom tray with aluminum foil.

Are you preheating barbecue in the

All burners on high for 10 to

prescribed manner?

15 minutes for preheating.

 

 

Are the cooking grates and

Clean thoroughly. (See

Flavorizer Bars heavily coated with

Section "Periodic Cleaning".)

burned-on grease?

 

 

 

Is the bottom tray "dirty" and not

Clean bottom tray.

allowing grease to flow into catch

 

pan?

 

Burner flame pattern is erratic. Flame is low

Are burners clean?

Clean burners. (See Section

when burner is on HIGH. Flames do not run the

 

"General Maintenance".)

whole length of the burner tube.

 

 

 

 

 

Inside of lid appears to be “peeling.” (Resembles paint peeling.)

The lid is porcelain-on-steel, not

Clean thoroughly. (See

paint. It cannot “peel.” What you are

Section "Periodic Cleaning".)

seeing is baked on grease that has

 

turned to carbon and is flaking off.

 

THIS IS NOT A DEFECT.

 

If problems cannot be corrected by using these methods, please contact Weber-Stephen Customer Service.

Image 29
Contents Skyline LP GAS Units only MDANGER MWARNINGSWarranty Patents and Trademarks Contents Gas supply testing For Installation in CanadaGeneral Instructions StorageStep AssemblyCheck package contents Two wheels Check contents of hardware packs Assemble frame Assemble wheelsInsert casters Continue frame assemblyComplete frame assembly Add cooking box Add front panelInstall manifold bracket General Specifications for Piping Install igniterInstall gas supply Gas line piping Typical natural gas supply installation. FigureTest connections Check that all burner valves are offCheck for gas leaks MWARNING Do not ignite burners when leak checkingInstall the bottom tray Install Flavorizer Bars and Cooking GratesInstall the condiment basket Install LidAdd control panel and burner control knobs Install swing tableHinge rod Complete accessory installation To Extinguish LightingManual Lighting Cooking Periodic CleaningStorage and/or Nonuse Drippings and greaseMWARNING Do not ignite burners while leak checking Annual MaintenanceInspection and Cleaning of the Weber Spider Stopper Guards MCAUTION Do not enlarge the burner ports when cleaning General MaintenanceWeber Spider Stopper Guards Main Burner Flame PatternTo reinstall the burners, reverse steps c through g Crossover Ignition System Operations Burner does not light, or flame is low in High position Troubleshooting15-16 11,15 20-21 Parts List Final Word Thanks
Related manuals
Manual 36 pages 15.17 Kb