Weber 2000 owner manual Troubleshooting & Maintenance

Page 28

TROUBLESHOOTING & MAINTENANCE

Problem

Check

Cure

 

 

 

Burners burn with a yellow or orange flame, in conjunction with the smell of gas.

Inspect Weber Spider Stopper

Clean Weber Spider Stopper

Guards for possible obstructions.

Guards. (See Section "Annual

(Blockage of holes.)

Maintenance".)

Burner does not light, or flame is low in HIGH position.

Is fuel hose bent or kinked?

Straighten fuel hose.

 

 

Does the Front burner light with a

If you can light the Front burner

match?

with a match, then check the

 

Crossover Ignition System.

Experiencing flare-ups:

mCAUTION: Do not line the bottom tray with aluminum foil.

Are you preheating barbecue in the

All burners on high for 10 to 15

prescribed manner?

minutes for preheating.

 

 

Are the cooking grates and

Clean thoroughly. (See Section

Flavorizer Bars heavily coated with

"Periodic Cleaning".)

burned-on grease?

 

 

 

Is the bottom tray "dirty" and not

Clean bottom tray.

allowing grease to flow into catch

 

pan?

 

Burner flame pattern is erratic. Flame is low

Are burners clean?

Clean burners. (See Section

when burner is on HIGH. Flames do not run

 

"General Maintenance".)

the whole length of the burner tube.

 

 

 

 

 

Inside of lid appears to be “peeling.” (Resembles paint peeling.)

The lid is porcelain-on-steel, not

Clean thoroughly. (See Section

paint. It cannot “peel.” What you are

"Periodic Cleaning".)

seeing is baked on grease that has

 

turned to carbon and is flaking off.

 

THIS IS NOT A DEFECT.

 

If the problem cannot be corrected using these methods, please contact Weber-Stephen Customer Service.

28

Image 28
Contents Genesis 2000 Series MDANGER MWARNINGS LP GAS Units onlyWarranty Patents and Trademarks Contents For Installation in Canada Gas supply testingGeneral Instructions StorageCheck package contents AssemblyStep Left hand slide bar assembly Check contents of hardware packs Assemble wheels Assemble frameComplete frame assembly Continue frame assemblyInsert casters Add cooking box Install manifold bracket Install igniterInstall gas supply General Specifications for PipingGas line piping Test connectionsCheck that all burner valves are off Connect flexible hose to manifoldCheck for gas leaks MWARNING Do not ignite burners while leak checkingInstall Flavorizer Bars and Cooking Grates Install the bottom trayInstall the lid Install tool holders, control panel and burner control knobsInstall swing table Complete accessory installation Lighting To ExtinguishManual Lighting Cooking Periodic CleaningStorage and/or Nonuse Annual Maintenance Inspection and Cleaning of the Weber Spider Stopper Guards General Maintenance Weber Spider Stopper Guards Main Burner Flame Pattern Replacing Main BurnersTo reinstall the burners, reverse steps c through g Crossover Ignition System Operations Troubleshooting & Maintenance Page 13-14 10,14 Parts List MWARNINGFinal Word Thanks