Brinkmann owner manual Pro Series 2500 Assembled

Page 29

Pro Series 2500 (Assembled)

GRILL LIGHTING INSTRUCTIONS:

 

 

 

 

1.

Read and follow all warnings and instructions

5.

Press the electronic igniter and hold for 3-5

7.

Repeat Steps 4-6 for lighting each burner. Always

 

in owner’s manual before lighting.

 

seconds to light burner.

 

use electronic igniter for lighting each burner.

2.

Open lid before lighting burner.

6.

If burner does NOT ignite immediately, turn control

8.

Refer to owner’s manual for match lighting procedure.

3.

Make sure all control knobs are in the OFF position.

 

knob to OFF, wait 5 minutes to allow gas to

9.

For assistance, call 1-800-527-0717.

4.

Select the burner to be lit. Push and turn the control

 

dissipate and repeat lighting procedure.

10. To turn off, turn control knobs clockwise until it locks

 

knob of that burner to HIGH.

 

 

 

in OFF position.

FOR OUTDOOR USE ONLY

SIDE BURNER LIGHTING INSTRUCTIONS:

1.Read and follow all warnings and instructions in owner’s manual before lighting.

2. Open lid before lighting side burner.

3.Make sure all control knobs are in the OFF position.

4.Push and turn side burner control knob of that burner to HIGH.

5.Press the electronic igniter and hold for 3-5 seconds to light burner.

MAXIMUM SIDE BURNER LOAD = 15 lbs.

6.If burner does NOT ignite immediately, turn control knob to OFF, wait 5 minutes to allow gas to dissipate and repeat lighting procedure.

7.Refer to owner’s manual for match lighting procedure.

8.For assistance, call 1-800-527-0717.

9.To turn off, turn control knob clockwise until it locks in OFF position.

28

Image 29
Contents Gas Stainless Steel Outdoor Grill For Your Safety Important SafetyPage Cylinder Specifications Installation InformationPage Hose and Regulator Installing the LP GAS Cylinder Onto the GrillFilling the LP GAS Cylinder Connecting Hose and Regulator to AN LP GAS Cylinder Checking for Leaks Leak TestingWhen to Perform a Leak Test PRE-START Check List Match Lighting the Main Burners Lighting InstructionsLighting the Main Burners Turning OFF the Grill Lighting the Side BurnerMatch Lighting the Side Burner Breaking in Your Grill Operating the GrillPreheating the Grill Controlling FLARE-UPSSide Burner Rotisserie CookingBefore Storing Your Grill Transporting and StorageSmoker BOX Burner ASSEMBLY/MAINTENANCE Cleaning and MaintenanceHardware CastingsProblem Possible Causes Burner will not light Trouble ShootingHelpful Hints CleanlinessGrilling to Proper Temperature Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts Card Contents Step Step Attach back cart panel by using four M6 X 50mm bolts Install door bracket using four Spring Pin Lower Pivot Screw Holes Procedures. See Grill Bottom Grease Tray Place warming rack in slots above cast iron cooking grills Pro Series 2500 Assembled Accessories Gallon PAN & Basket SET Warranty