Precision Trading PM5300 Safety Information Warnings and Cautions, Consult Accompanying Documents

Page 4

SAFETY Information - Warnings and Cautions

DANGER

WARNING

CAUTION

CAUTION

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

CONSULT ACCOMPANYING DOCUMENTS

Symbol for “USE NO OIL”

Symbol indicates the device complies with the requirements of Directive 93/42/EEC concerning medical devices and all applicable International Standards. (On CE marked Devices ONLY)

WARNING

Only trained, qualified medical personnel under the direct supervision of a licensed physician should operate the Air-Oxygen Blender .

Use this Air-Oxygen Blender only for its Intended Use as described in this manual.

Confirm prescribed dose before administering to patient. Monitor on a frequent basis.

The Air-Oxygen Blender shall be serviced by a qualified service technician.

Always follow ANSI and CGA standards for Medical Gas Products, Flowmeters and Oxygen Handling.

Blender

Air-Oxygen

Image 4
Contents E R M a N U a L Contents Read ALL Instructions Before Using Receiving / InspectionIntended Use Explanation of AbbreviationsSafety Information Warnings and Cautions Consult Accompanying DocumentsBlender Specifications Pressure Drop Transport / Storage RequirementsDryness and Composition for inlet gases Diagrams Component Description Installation AlarmAir Inlet Fitting Rear Slide Mount with dove tailReverse Gas Flow Procedure Alarm TestOperating Instructions Performance Check CleaningVerification consists Technical Description Returns Disposal Instructions MaintenancePlease Recycle Troubleshooting Problem Probable Cause RemedyLimited Warranty Limitation of Liability Two 2 years from shipmentDeclaration of Conformity