COMPONENT Description
ITEM | DESCRIPTION |
AOxygen Concentration Dial
A dial used for selecting oxygen concentrations between
BPrimary Outlet Port
A male DISS oxygen fitting with check valve that delivers flow when engaged to any controlling device, such as a flowmeter.
CAuxiliary Outlet Port
A male DISS oxygen fitting with check valve that delivers flow when engaged to any controlling device, such as a flowmeter. This outlet is equipped with a bleed valve that allows the user to control if the bleed is ON or OFF. With the bleed in the ON position, this outlet delivers accurate oxygen concentrations in the following flows:
Model | Flow Range |
High Flow | 2 – 100 lpm |
Low Flow | 0 – 30 lpm |
DAuxiliary Bleed Collar
The collar is used to engage and disengage the bleed. The bleed is necessary to maintain accurate FiO2 Concentration below 15 lpm for the High Flow and 3 lpm for the Low Flow. This collar is designed to prevent accidental disengagement of the bleed. To activate the bleed, turn the knurled collar until the bleed pin is engaged. Slide collar back until it contacts the cover. To deactivate the bleed, pull collar away from cover while rotating until the collar slot engages the pin, turn additional 1/4 turn to lock in place.
EOxygen Inlet Fitting
A female DISS or NIST oxygen fitting with one way valve that is used to connect an oxygen supply hose.