13.2 Remote Control Button
13.2.1SET Button
•To check remote control transmission code and store the transmission code to EEPROM o Press “Set” button continuously for 10 seconds by using pointer
o Press “Timer Set” button unit a “beep” sound is heard as confirmation of transmission code change.
13.2.2RESET (RC)
•To clear and restore the remote control setting to factory default. o Press once to clear the memory
13.2.3RESET (AC)
•To restore the unit’s setting to factory default. o Press once to restore the unit’s setting
13.2.4TIMER ▲
•To change indoor unit indicators’ intensity: o Press continuously for 5 seconds.
13.2.5TIMER ▼
•To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F) o Press continuously for 10 seconds.
56