Stopping Treatment

6After starting therapy, an introductory treatment screen will display:

Smode example

S:RAMP 4.0-10.0

>>>> PS 6.0


LK: 10L/min						RR: 15
MV: 10.2						VT: 680


S**TiMn						TiMx 2.0

Ti 1.5s						1: 1.6


SpO2: 98%

HR : 60						exit

Mode and pressure display

Leak and breath information

Inspiration information

This screen only displays if ResLink and an oximeter are connected

English

To stop treatment at any time, remove your mask and press . If your clinician has enabled SmartStart/Stop, simply remove your mask and treatment will end.

Note: SmartStart/Stop does not operate if:

•you have a Full Face Mask; or

•Leak Alert is enabled.

Using the Mask-Fitting feature

The VPAP IV and VPAP IV ST include a mask-fitting feature to help you fit your mask properly. The mask-fitting feature delivers air pressure for a three-minute period, prior to starting treatment, for checking and adjusting your mask fit to minimise leaks.

To use the mask-fitting feature:

1Fit your mask as described in the mask user instructions.

2Hold down for at least three seconds until air pressure delivery starts and the following screen appears:

MASK FIT:	*****
excelnt	*****
	Mask-fit star rating

The LCD displays a mask-fit star rating from zero to five stars. Three to five stars indicates a good fit or better. Zero to two stars indicates that the mask needs to be adjusted.

Using the VPAP IV and VPAP IV ST