ResMed VPAP IV ST manual Reminders on the Vpap LCD, Smart Data

Reminders on the VPAP LCD

Your clinician may have set your VPAP device to remind you about important events, such as when to replace your mask, when to insert your Data Card (if your device is Data Card enabled) and so on.

The reminder message is displayed on the LCD and is visible if the device is not delivering therapy. The backlight on the LCD flashes when a message is displayed. Your clinician can set any of the following reminders on your LCD:

Message Description Action

INSERT	May appear if your device is
CARD	Data Card enabled.

Insert your Data Card and follow any instructions that your clinician has given you. When you have done this, the message will

disappear from the LCD. Pressing (Ok) will also remove the message.

REPLACE	Reminds you that your mask	Press	(Ok) to remove the message
MASK	is due for replacement.	from your LCD and replace your mask with a
		new one.
CALL	Reminds you to contact your	Press	(Ok) to remove the message
PROVIDER	clinician; for example to	from your LCD and contact your clinician/
	discuss your therapy.	service provider.
REPLACE	Reminds you to replace the	Press	(Ok) to remove the message
FILTER	air filter on your device.	from your LCD and replace the air filter.
SERVICE	Reminds you to return your	Press	(Ok) to remove the message
DUE	device for service.	from your LCD and contact your clinician/
		service provider.
Customised	Your clinician may also set	Press	(Ok) to remove the message
messages	reminders for other reasons;	from your LCD and contact your clinician/
	for example to call a	service provider.
	particular person or number.

Smart Data™

Smart Data menus only appear if enabled by the clinician. Your clinician can set any of the following Smart Data options:

Message	Description
PRESSURE	Displays the therapy pressure from the previous session.
MASK FIT	Displays the mask-fit star rating from the previous session.
USAGE	Displays the usage hours from the previous session.
AUTO APPEAR	If ON is selected, Smart Data screens are automatically displayed
	when you turn on your device.

8