ResMed VPAP IV ST manual Traveling with the Vpap IV and Vpap IV ST

Page 13

Traveling with the VPAP IV and VPAP IV ST

International Use

Your VPAP flow generator has an internal power adapter that enables it to operate in other countries. It will operate on power supplies of 100–240V and 50–60Hz. No special adjustment is necessary, but you will require an approved power cord for that country.

Use on an Aircraft

Please consult the medical services department of your carrier if you intend to use your VPAP device on an aircraft.

Note: You should not use your VPAP device while the aircraft is taking off or landing.

Use with DC Power

You must use a ResMed DC/DC Converter 24V/50W to connect your VPAP to a 12V or 24V DC power source. Contact your equipment supplier or ResMed for details.

WARNING

!The device should not be connected to both AC and DC power sources simultaneously.

10

Image 13
Contents User Guide Vpap Vpap IV ST Contents Vpap System IntroductionContraindications Adverse EffectsHumidifier MasksResScan Data Card Supplemental OxygenSetting up your Vpap Using the Vpap IV and Vpap IV STAttaching a H4i Humidifier How to Use the Control PanelServicing Using the MenusSmartStart How to Select the Mask TypeStarting Treatment Stopping Treatment Using the Mask-Fitting featureSmart Data Reminders on the Vpap LCDCopying Data onto a Data Card Using the Data CardTraveling with the Vpap IV and Vpap IV ST Daily Cleaning and MaintenanceWeekly MonthlyServicing Problem/Possible Cause Solution TroubleshootingComponent failure Symbols Which Appear On The Device Technical SpecificationsGeneral Warnings and Cautions General Warnings and Cautions Page Limited Warranty
Related manuals
Manual 25 pages 57.32 Kb