Cleaning and Maintenance
You should regularly carry out the cleaning and maintenance described in this section. Refer to your mask and humidifier manuals for detailed instructions regarding the care of those devices.
Daily
Disconnect the air tubing and hang it in a clean, dry place until next use.
Weekly
1Remove the air tubing from the VPAP device and the mask.
2Wash the air tubing in warm water using mild detergent.
3Rinse thoroughly, hang, and allow to dry.
4Before the next use, reconnect the air tubing to the air outlet and mask.
Monthly
1Clean the exterior of the VPAP with a damp cloth and mild liquid soap.
2Check the air filter for holes and blockage by dirt or dust.
WARNING
!• Beware of electric shock. Do not immerse the unit or power cord in water. Always unplug the unit before cleaning and be sure it is dry before plugging back in.
•The mask system and air tubing are subject to normal wear and tear. Inspect them regularly for damage.
Replacing the Air Filter
Replace the air filter every six months (or more often if necessary).
1Remove the air filter cover at the back of the VPAP device.
Air filter cover
2Remove and discard the old air filter.
3Insert a new filter with the
4Replace the air filter cover.
WARNING
!• Do not wash the air filter. The air filter is not washable or reusable.
•The air filter cover protects the device in the event of accidental liquid spillage onto the device. Ensure the air filter and air filter cover are fitted at all times.
English |
Cleaning and Maintenance | 11 |