Konica Minolta 300 instruction manual Foreword

Page 10

Foreword

Notes on Use

This instrument should be used under the following operat- ing conditions.

Temperature of 0 to 40°C (32 to 104°F), relative humidity of 30 to 85%, with no condensation.

Atmospheric pressure of 700 to 1060 hPa (altitude of 400 to 3000m).

This is a precision instrument. To avoid the possibility of it being damaged, the instrument should not be dropped nor should heavy objects be placed on top of it.

Do not expose this instrument to rain and water.

This instrument has no alarm function. Do not use this in- strument if an alarm function is necessary.

This instrument is designed for use on adults. When using the instrument on infants or babies, please note that the de- signed measurement accuracy cannot be guaranteed.

Do not use the instrument on a point where there is exces- sive vibration. In addition, to avoid excessive impact on the instrument, it should be handled gently. Failure to observe this may cause breakdown.

Accurate measurement data may not be obtained in the fol- lowing cases.

When body movement is excessive When the probe is not attached properly

When blood circulation at the measuring point is poor (due to pressure on arm/finger, peripheral circulatory insuffi- ciency)

When ambient light (e.g. panel light, fl uorescent light, in- frared heat lamp, direct sunlight) is too strong

When infl uenced electromagnetically by other electronic devices (e.g. near electrical appliances like TV, medial device)

When a mobile telephone is used during measurement

8

Image 10
Contents PULSOX-300 Safety Symbols Safety Precautions Foreword Contents Safety Notes ForewordPackage Contents About ProbeSystem Diagrams and Accessories Names of Parts Foreword Difference from the SaO2 value to displayed value Foreword Disposal Method Preparations PreparationsConnecting the probe Installing the battery Measurement Starting the MeasurementReading the display Pulse rate P.RAbout Auto Power-Off function Ending the MeasurementTrouble Shootings Error MessagesCheck Points Check Points Check Points Check Points before repairing Specification DisplayProbes SR-5C, SP-5C, LM-5C, SD-5C Appendix Calculation Method for Displayed ValuesEMC Guidance Compliance Measurement Principle Oxygen Saturation vs. Oxygen Partial Pressure Manufacturer