Konica Minolta 300 instruction manual Foreword

Page 4

Foreword

CAUTION

(Failure to adhere to the following points may result in injury or damage to the in- strument or other property.)

Do not use batteries other than those specified by KONICA MINOLTA SENSING, INC. When installing batteries in the instrument, make sure that they are correctly oriented according to the mark.

If alkali fl uid from the battery comes in contact with eyes, skin, or clothing, immediately wash the af- fected area and see a physician for treatment.

Do not use probes other than those specified by KONICA MINOLTA SENSING, INC. Use of alterna- tive probes may cause the probe to overheat, result- ing in burns.

Do not operate the instrument for long periods of time with a probe attached to a patient. Low- temperature burn, redness or rash may result. If you feel pain or itchiness, stop use of the instrument im- mediately and consult a doctor. A doctor should also be consulted before using the instrument on patients with high fever, those with peripheral blood circula- tion problems or those with sensitive skins.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PULSOX-300 Safety Symbols Safety Precautions Foreword Contents Safety Notes ForewordPackage Contents About ProbeSystem Diagrams and Accessories Names of Parts Foreword Difference from the SaO2 value to displayed value Foreword Disposal Method Preparations PreparationsConnecting the probe Installing the battery Measurement Starting the MeasurementReading the display Pulse rate P.RAbout Auto Power-Off function Ending the MeasurementTrouble Shootings Error MessagesCheck Points Check Points Check Points Check Points before repairing Specification DisplayProbes SR-5C, SP-5C, LM-5C, SD-5C Appendix Calculation Method for Displayed ValuesEMC Guidance Compliance Measurement Principle Oxygen Saturation vs. Oxygen Partial Pressure Manufacturer
Top Page Image Contents