Konica Minolta 300 instruction manual Package Contents, About Probe

Page 7

Package Contents

Before using the instrument, make sure that the following items

are present.

1)PULSOX-300 main body × 1

2)Wristband WB-300 × 1

3)AAA-size alkaline battery × 1

4)Instruction manuals

PULSOX-300 instruction manual × 1

Separate manual (Using manual for Probes) × 1

✻The probe is optional.

Foreword

About Probe

The following probe types can be used with this instrument.

•Finger Clip Probe SR-5C

•Spot Check Probe SP-5C

•Monitor Probe LM-5C

•Personal Probe SD-5C

◆As shown in the table below, the measuring point varies with the probe used, so select the one that is suitable for your purpose.

Probe type

Patient

Allowed measuring point

SR-5C

 

 

SP-5C

Adult

Finger (hand)

LM-5C

 

 

SD-5C

 

 

◆For the usage method, please refer to “Connecting the probe” (page 13) on this manual and the probeʼs instruction manual.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PULSOX-300 Safety Symbols Safety Precautions Foreword Contents Foreword Safety NotesAbout Probe Package ContentsSystem Diagrams and Accessories Names of Parts Foreword Difference from the SaO2 value to displayed value Foreword Disposal Method Preparations PreparationsConnecting the probe Installing the battery Starting the Measurement MeasurementPulse rate P.R Reading the displayEnding the Measurement About Auto Power-Off functionError Messages Trouble ShootingsCheck Points Check Points Check Points Check Points before repairing Display SpecificationProbes SR-5C, SP-5C, LM-5C, SD-5C Calculation Method for Displayed Values AppendixEMC Guidance Compliance Measurement Principle Oxygen Saturation vs. Oxygen Partial Pressure Manufacturer
Top Page Image Contents