Omega Engineering OS533E manual Gnd

Page 61

7Specifications

Average Temperature
Accuracy Time Period	30 days
(under continuous operation):
Emissivity:	0.10 to 1.00 in 0.01 increments,
	set via keypad
Calculated Temperature	Maximum (MAX), Minimum (MIN),
Values:	Average (AVG), Differential (dIF),
	Thermocouple (TC)
Ambient Target	Set and enabled via keypad
Temperature Compensation:(OS533E, OS534E, OS523E, OS524E)
RS232 Output (for	Standard on OS533E, OS534E, OS523E, OS524E
personal computers	9600 bits per second, 8 bits of data,
and serial printers):	1 stop bit, no parity
RS-232 Cable:	RJ12 to 9 pin D connector, Female
	RJ12 Pin #	9 pin D connector Pin #
	3 TX	2 RX
	4 RX	3 TX
	5 GND	5 GND
Analog Cable:	6 feet long; 2-conductor, 22 AWG
	3.5mm male plug
Alarm:	Set and enabled via keypad
	All models:	High alarm standard, with
		audible and visual indication
	OS533E, OS534E Low alarm standard, with
	OS523E, OS524E: audible and visual indication
Data Storage:	OS534E, OS523E	Up to 800 temperature data
	OS524E:	points.
Aiming Feature:	”V” groove on top of the thermometer or use Laser
	Sighting
Analog Output:	1 mV/°F or 1 mV/°C, set via keypad
	(0.5 mV/Deg, OS524E)
Analog Output Accuracy:	±2mV reference to temperature display
Power:	4 AA size 1.5 volt batteries (lithium or alkaline)
Battery Type
Alkaline	General brand
Lithium:	Eveready Energizer, model number L91 BP-2
Battery Storage	–40°C to 50°C (-40°F to 122°F)
Temperature

7-2

Image 61

Contents User’sGuide Servicing North America Unpacking Instructions Accessories Page Unpacking Instructions Chapter General Description Chapter Maintenance General Description Introduction OS530LE OS530HRE OS530LE-CF OS533E-CF OS534E-CF Features OS523E OS524E LCD Parts of the Thermometer Front of the ThermometerKey General Description General Description Installing the Batteries Ac Power OperationField of View Positions Operating the ThermometerField of View OS534E, OS523E-1 Field of View OS53xE-CF Field of View OS523E-3 Measurement Techniques 11 Recorder Hookup 12. General Operational Block Diagram Real Time Mode Active OperationReal Time Modes 13. Visual Function Flow Chart Using the Lock Function Adjusting EmissivityUsing the Trigger Function Must be hard, flat, and reflective to ultrasonic pulse Using the Distance FunctionDS = 17. Field of View of Distance Meter HH-DM Laser Sighting Status Calculating Temperature ValuesTurning on the Display Backlighting Changing the Temperature from F to C or vice VersaThermocouple Input OS532E, OS533E, OS534E Using the Alarm Functions To set the low alarm value OS533E, OS534E, OS523E, OS524E Use the Ambient Target Temperature Compensation Atcf Operation PC User Application, OS530 Series19. Main Menu 10. Settings Menu Settings Menus21. Typical Temperature Data File Ascii PC Interface CommandsString Description Storing Temperature Data on Command OS534E, OS523E, OS524E Logging Temperature Data in Real Time OS523E, OS524E,OS534E Erasing the Temperature Data from Memory Mode Recall Mode Passive OperationRecall Modes Reviewing the Last Parameters Laser Sighting Right Side View DescriptionOperating the Laser Sighting Two Laser ConfigurationsLines of Sight of the Laser Sighting and Thermometer Sighting Scope Installing and Operating the Sighting ScopeInstalling the Sighting Scope Maintenance Replacing the Batteries Safety WarningCalibrating the Thermometer Cleaning the LensServicing the Laser Sighting Problem Solution Troubleshooting GuideTroubleshooting Guide Problem Troubleshooting Guide Specifications Specifications are for all models except where notedGND With Built-in Distance Module Laser Sighting Distance Measuring Built-in-DM Specifications Glossary of Key Strokes Glossary of Key Strokes Appendix How Infrared Thermometry Works a Thermal RadiationBlackbody Calculating Temperature Optics Field of View Appendix Emissivity Values MetalsNonmetals Appendix Determining an Unknown Emissivity Figure C-1. Determining Emissivity Figure C-2. Determining Emissivity with a Drilled Hole Appendix Determining an Unknown Emissivity Index Field of View Diagrams Recall WARRANTY/DISCLAIMER PH/CONDUCTIVITY Temperature