Button until a

Measurements

Measurement with the Desired Systolic Pressure

Model UA-767NFC is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically.

Use this method when re-inflation occurs repeatedly or when the results are not displayed even if the pressure decreases to 20 mmHg or less.

Place the cuff on the arm (preferably the left arm). At heart level

Press and hold the

START

Press and hold

number about 30

to 40

mmHg higher

START

than your expected systolic pressure

the button

appears.

Release the button

When the desired number is reached,

at the desired

release the

button to start

systolic pressure

START

measurement.

Continue to measure

your blood pressure as described on

the previous page.

Refer to the previous page

for measurement

Notes for Proper Measurement

Sit down in a comfortable position. Place your arm on a table with your palm facing upward and the cuff at the same level as your heart.

Relax for about five to ten minutes before taking a measurement. If you are excited or depressed by emotional stress, the measurement will reflect this stress as a higher (or lower) than normal blood pressure reading and the pulse reading will usually be faster than normal.

An individual's blood pressure varies constantly, depending on what you are doing and what you have eaten. What you drink can have a very strong and rapid effect on your blood pressure.

This device bases its measurements on the heartbeat. If you have a very weak or irregular heartbeat, the device may have difficulty determining your blood pressure.

Should the device detect a condition that is abnormal, it will stop the measurement and display an error symbol. Refer to page 5 for the description of symbols.

This blood pressure monitor is intended for use by adults only. Consult with your physician before using this device on a child. A child should not use this device unattended.