A&D UA-767NFC instruction manual How to Take Proper Measurements, After Measurement

Using the Monitor

Symbols that are printed on the cuff

Symbols	Function/Meaning	Recommended Action
		Set the	mark on the artery
	Artery Position Mark	of the upper arm or in line with
		the ring finger on the inside of
		the arm.

▲Index

REF	Catalog number
	Proper fit range for Adult Cuff
	It's printed on the Adult Cuff.
	Range to use Large Adult Cuff	Use Large Adult Cuff instead of
	It's printed on the Adult Cuff.	Adult Cuff.
	Proper fit range for Large Adult Cuff
	It's printed on the Large Adult Cuff.
	Range to use Small Adult Cuff	Use Small Adult Cuff instead of
	It's printed on the Adult Cuff.	Adult Cuff.
	Proper fit range for Small Adult Cuff
	It's printed on the Small Adult Cuff.
	Range to use Adult Cuff	Use Adult Cuff instead of Large
	It's printed on the Large Adult Cuff
		Adult Cuff or Small Adult Cuff.
	and Small Adult Cuff.
	Lot number

How to Take Proper Measurements

For the most accurate blood pressure measurement: Sit comfortably at a table. Rest your arm on the table.

Relax for about five to ten minutes before measurement.

Place the center of the cuff at the same height as your heart.

Remain still and keep quiet during measurement.

Do not measure right after physical exercise or a bath. Rest for twenty or thirty minutes before taking the measurement.

Try to measure your blood pressure at the same time every day.

Measurement

During measurement, it is normal for the cuff to feel very tight. (Do not be alarmed).

After Measurement

After measurement, press the START button to turn the device off. After one minute of non-operation, the device will turn off automatically.

Remove the cuff and record your data.

Note: Allow at least three minutes between measurements on the same person.

11