A&D UA-767NFC instruction manual Operation Mode, Normal Measurement, Memory Function

Page 7

Operation Mode

1. Normal Measurement

Press the START button. Blood pressure is measured and the data is stored in memory.

2. Memory Function

This monitor can store the last 100 measurements in memory. When the measurement exceeds 100, the oldest data will be deleted automatically and the most recent data will be stored.

This monitor does not display the data stored in memory. The memory data can only be read by an NFC-enabled device.

3. Deleting all Data Stored in Memory

Make sure that the monitor displays the clock. Press and hold the button.

The mark appears. After a while it starts blinking, then disappears.

Now all data stored in memory has been deleted.

Note: This operation will delete all data stored in memory. You cannot select which data to delete.

4. Measurement with the Desired Systolic Pressure

Refer to page 13 for measurement with the desired systolic pressure.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model UA-767NFC Contents Dear Customers PrecautionsPreliminary Remarks Display Parts IdentificationSymbols that are printed on the device case SymbolsMeasurement Battery is low when it blinks Deleting all Data Stored in Memory Operation ModeNormal Measurement Memory FunctionConnecting the AC Adapter Using the MonitorInstalling / Changing the Batteries Connecting the Air HoseSelecting the Clock Mode Select the year using the button Adjusting the ClockApplying the Arm Cuff Selecting the Correct Cuff SizeMeasurement How to Take Proper MeasurementsAfter Measurement Measurements Button until a Measurement Data Transmission Memory Data TransmissionAbout Blood Pressure What is an Irregular HeartbeatPressure Bar Indicator What is Blood Pressure?Blood Pressure Variations What is Hypertension and How is it Controlled?Why Measure Blood Pressure at Home? WHO Blood Pressure ClassificationTroubleshooting Technical Data MaintenanceENGINEERING, INC
Top Page Image Contents