LOADING THE BATTERIES
English | (Batteries supplied with the unit should be loaded in compartment before you use | |
the blood pressure monitor.) | ||
| ||
| 1 Open the cover of battery compartment. | |
|
|
Pressing the hook down, pull the cover toward you to open.
Español | 4 “AA” batteries |
| |
Português | Hook |
Battery | |
compartment | |
|
Battery cover
Italiano |
| * If the Blood pressure monitor |
Lug (projecting section) | is left unused for an extended | |
| period of time, the batteries | |
|
| should be removed from the |
Français |
| compartment. |
2 Place batteries in the compartment. |
| |
|
| |
| Put the batteries paying attention to the positive and negative terminal symbols | |
| and . |
|
中文 |
|
|
LOADING THE BATTERIES
3 Close the battery cover.
Fitting the lugs of the cover at the mating recesses of the battery compartment body, push the hook to close the cover.
Fit the lugs (projections) at the recesses.
REMOVING THE BATTERIES
•When the icon 
is displayed or nothing appears in the display, replace the old batteries with four new ones. All four batteries should be changed at once.
•The memory is erased if the batteries are removed for replacement. It is recommended to make note of the data stored in memory prior to changing batteries.
•Do not use rechargeable batteries.
•Do not use alkaline (LR6) and manganese (R6P) batteries together.
•Batteries included are for demonstration purposes only. Battery life may be shorter than specified.
•When disposing of used batteries, comply with governmental regulations or environmental public institution’s rules that apply in your country/area.
中文 Français Italiano Deutsch Português Español English
- Eng 10 - | - Eng 11 - |