Citizen CH-453 instruction manual Automatic Power OFF Feature, Manual pressurization

Page 9

English Español Português

Italiano Français 中文

MEASURING YOUR BLOOD PRESSURE

5Finishing measurement.

• Press the “START/STOP” switch to turn the monitor off.

* When you want to stop measurement,

press the “START/STOP” switch. The

cuff is deflated and measurement

stops.

 

START/STOP Switch

 

[Manual pressurization]

 

• If your systolic blood pressure is expected to exceed

 

200 mmHg, use Manual Pressurization when taking

 

a measurement.

 

• Keep “START/STOP” switch held pressed until

 

the pressure value you want to stop pressurization

 

is reached (approximately 40 mmHg higher

 

than the Systolic blood pressure). You can stop

START/STOP Switch

pressurization by the unit by releasing the switch at

 

the aforementioned value is reached.

 

The upper pressure limit is 280 mmHg

AUTOMATIC POWER OFF FEATURE

After taking the blood pressure measurement, pressing the “START/STOP” switch will turn the monitor off. However, if you do not press the switch, the monitor’s Auto OFF function will automatically turn the monitor off after 3 minutes.

TIPS FOR OBTAINING ACCURATE MEASUREMENTS

Your blood pressure varies according to your posture, the time of day and a range of other factors. Ideally, you should measure your blood pressure in the same posture at the same time every day.

Taking measurements while sitting

1 Place your arm on a table or similar surface with your forearm extended.

2 It is important to have the cuff level with your heart.

3 Open your hand slightly on the table so that your palm is facing up and your fingers are relaxed.

4 Do not move your body or talk while taking the measurement.

Measurement in a reclining posture

* Relax yourself to avoid

placing pressure on the cuff.

1Lie down, facing the ceiling.

2Lightly open your hand with palm up and straighten your arm.

3Relax your body, arm and fingers.

4Do not move your body or talk during measurement.

You may use your right arm to measure your blood pressure.

Blood pressure value is likely to differ by as much as 10 mmHg when measured on the right arm instead of the left (or vice-versa). Measure your blood pressure on the same arm each day.

中文 Français Italiano Deutsch Português Español English

- Eng 16 -

- Eng 17 -

Image 9
Contents REF CH-453 General Remarks ContentsPrecautions for use Measure your blood pressure at the same time each dayRemarks Maintenance Precautions Symbols ExplanationEnglish Component names Main Unit Identification of PartsCuff DisplayLoading the Batteries Close the battery coverRemoving the Batteries EspañolMeasuring Your Blood Pressure Your health condition Connector into the main UnitManual pressurization Automatic Power OFF FeatureTaking measurements while sitting Measurement in a reclining posturePress the Memory switch HOW to Call UP the DataCalling UP the Data Stored in Memory 3A and pulse are alternately displayedKEY to Display Icons What is blood pressure?About Blood Pressure Your blood pressure changes all the timeItaliano Blood Pressure Q&ASpecifications Design and Specification are subject to change without notice