Auto Filter Cleaning

Filter Cleaning Indicator

•Filter cleaning will run automatically after the air conditioner operation stops (air conditioner is turned off using remote control).

•After the filter cleaning is completed, the air conditioner operation will remain off.

•Filter cleaning will run automatically after the air conditioner operation stops (air conditioner is turned off by the air conditioner timer).

•After the filter cleaning is completed, the air conditioner operation will remain off.

•Once the air conditioner operation time exceeds 24 hours, the unit is forced to run filter cleaning.

•After the filter cleaning is completed, the air conditioner operation will resume automatically.

•The ﬁlter cleaning indicator light will move to left or right when ﬁlter cleaning is in progress.

•Filter cleaning in progress will be cancelled if:

-Certain button on the remote control are pressed.

-The air conditioner main unit’s movable front panel is lifted up.

-There is a power failure.

●Timer indicator is blinking and error code H51 is revealed on the display.

●Timer indicator is blinking and error code H52 is revealed on the display.

►The ﬁlter cleaning device is jammed because the ﬁlter is not installed correctly.

►The ﬁlter cleaning device is malfunction.

►Printed circuit board is malfunction.

Note :

•To reveal the error code, please refer to Product Overview’s troubleshooting-error code checking.

•The condition above does not affect the unit’s operation.

•In case of malfunction, please consult your nearest authorized dealer.