Ventilation

■Operation Details

•To aerate the room.

•As a default setting, ventilation will be turned on automatically once the air conditioner operation starts.

VENTILATION : Simultaneous Operation

•Operates simultaneously with Auto/ Cooling/Heating/Drying operation.

•Press repeatedly to select your desired ventilation setting. Auto/Cooling/Heating/Drying operation remains as normal regardless of ventilation setting.

Low Ventilation

No Ventilation

Auto Ventilation

•When is pressed, all of the air conditioner operations are turned off.

VENTILATION : Independent Operation

•Ventilation operates independently.

•Ventilation can be turned on when the air conditioner is in non- operation mode.

•Fan speed in this setting remains as AUTO.

•Press to turn off the ventilation operation.

Select your desired ventilation setting.

Troubleshooting

●Timer indicator is blinking and error code H50 is ► Ventilation fan motor may be locked due to piles of dust accumulated in

revealed on the display.	the ventilation area and fails to discharge.
	► Printed circuit board is malfunction.
	► Ventilation fan motor is malfunction.

Note :

•To reveal the error code, please refer to Product Overview’s troubleshooting-error code checking.

•The condition above does not affect the unit’s operation.

•In case of malfunction, please consult your nearest authorized dealer.