■Setting
Disable Filter Cleaning
•To disable the filter cleaning permanently, follow steps 1 to 3 as shown below.
1 
Press and hold for more than 20 seconds. ON will blink on the display.*
2 
Press to select OFF.
3 
Press to confirm the setting. CLEANING will disappears from the display.
•Auto and timer filter cleaning are no longer valid.
•Select ON in step 2 above to enable filter cleaning.
■Hint
•Manual filter cleaning is operable
by pressing 
. For detail, see manual filter cleaning page.
CHANGE FILTER CLEANING DEFAULT SETTING
• As a default setting, filter cleaning will run automatically once the air conditioner unit is turned off.
Press and hold until you | Press once. |
1 hear 3 beeps (about 11 | 2 You will hear 1 beep.* |
seconds). |
|
Auto OFF/ |
|
ON button. | Press 3 times until you |
| |
| 3 hear 3 continuous beeps.* |
4 Press to select your desired filter cleaning setting: | |
When you hear | Setting | |
1 beep | • | Filter cleaning will run automatically after the air conditioner |
|
| operation stops (air conditioner is turned off using remote control). |
| • | After the filter cleaning is completed, the air conditioner operation |
|
| will remain off. |
2 beeps ** | • | Filter cleaning will run automatically before the air conditioner |
|
| operation starts (air conditioner is either turned on using remote |
|
| control or turned on by the air conditioner timer). |
| • | After the filter cleaning is completed, the air conditioner operation |
|
| will start automatically. |
3 beeps ** | • | Filter cleaning will run automatically before the air conditioner |
|
| operation starts (air conditioner is turned on using remote control). |
| • | After the filter cleaning is completed, the air conditioner operation |
|
| will start automatically. |
1 long beep | • | Filter cleaning will run automatically after the air conditioner |
(default setting) |
| operation stops (air conditioner is either turned off using remote |
| control or turned off by the air conditioner timer). | |
|
| |
•After the filter cleaning is completed, the air conditioner operation will remain off.
*Use a sharp end object to press this button.
**The setting is valid only if the following conditions are fulfilled:
1.The air conditioner is turned off for at least 3 minutes.
2.The air conditioner has operated continuously for at least 2 hours in previous operation.
10