■About
Filter cleaning
Filter cleaning function helps to:
•Clean the filters automatically on a regular basis.
•Avoid airflow blockage caused by dusty filter.
•Prevent growth of mold inside the unit.
•Improve heating/cooling effect that saves energy consumption.
INTRO TO FILTER CLEANING
Filter Cleaning Device
•By default, filter cleaning will run automatically once the unit is turned off if the air conditioner:
-Operates continuously for at least 2 hours and above, and
-Accumulative operation time is at least 2 hours and above.
•The filter surface is divided into rows. Each cleaning cycle will clean one row at a time. The numbers of rows to be cleaned will be based on the air conditioner’s accumulative operation time and model purchased. The following table is an example for model 1.5 HP.
Accumulative operation time | Number of cleaning cycle |
(<: less than) | (1 cycle: < 4 minutes) |
< 2 hours | 0 |
2 hours and < 6 hours | 2 |
|
|
6 hours and < 9 hours | 3 |
|
|
9 hours and < 12 hours | 4 |
|
|
12 hours and < 15 hours | 5 |
|
|
15 hours and < 18 hours | 6 |
18 hours and < 21 hours | 7 |
|
|
21 hours and < 24 hours | 8 |
•The number of cleaning cycle depends on the fan speed setting as well. The table above is an example when the fan speed setting is HI. The number of cleaning cycle will be lesser if the fan speed setting is lower.
•You can also set the filter cleaning manually. For details, see Timer Filter Cleaning and Manual Filter Cleaning in the following pages.
Troubleshooting
●When the first air conditioner operation is initialized, filter cleaning will run one cycle automatically.
►This is a normal operation to make sure the filter cleaning device is able to move smoothly.
►Filter cleaning will not be terminated by pressing any of the remote control buttons. Filter cleaning will stop by itself after operates for one cycle.
6