6 | en Safety instructions | NurseCall Relay Unit |
|
|
|
CAUTION!
Maintenance and repairs may only be performed in conformance with the instructions and by authorized technical personnel only.
The sole possession of the user manual does not allow the personnel to perform any kind of repair on the NurseCall Relay Unit.
Take into account all the warnings and follow all the instructions displayed on the NurseCall Relay Unit and those which are printed in the documentation.
Never try to use replacement pieces other than those authorized by the manufacturer of the NurseCall Relay Unit.
CAUTION!
It is mandatory to use the products specified in the present user manual to clean the NurseCall Relay Unit. If you plan to use another product, only do so after having obtained the authorization of the manufacturer.
DANGER!
The NurseCall Relay Unit contains highly sensitive electronic components. It should be opened only in an ESD protected environment with respect to the following precautions:
1.Discharge yourself from electrostatic loads by touching a grounded conductive surface before opening the unit.
2.Avoid touching conductive parts inside the unit if not absolutely necessary.
CAUTION!
Never let any liquid enter the system. In case of liquid spill inside the NurseCall Relay Unit, act immediately as follows:
1. Switch off the unit using the main switch under the casing.
2. Unplug the power supply adaptor.
3. Dry up the unit.
4. Clean the unit.
5. Check that the unit switches on correctly.
1.4.1Observation and information
In case of defective operation or any other technical incident for which no remedy is described in this manual, please contact immediately your local representative.
F.01U.252.722 V1 2011.12 | User Manual | Bosch Security Systems |